Technical engineering job candidates Cardiff South Wales | Sigma Recruitment

Search For A Job

Submit Your CV

Looking for a new position? Attach your CV and a Sigma Recruitment consultant will be in touch shortly to discuss any suitable job vacancies.
Submit Now

Free CV Review

Click below to get your CV reviewed by one of our top consultants.
Review My CV

Technical and Engineering

Please see a selection of technical & engineering candidates, who are based in and around the following areas, Cardiff, Swansea, Newport, Bridgend, Port Talbot, Pontypool, Crumlin, Blackwood, Abergavenny, Llanelli, Ebbw Vale, Tredegar, Caerphilly, Pontypridd, Llantrisant & Neath.


SRMS57022  Manufacturing Engineer  £30K+

Degree qualified in the field of mechanical and manufacturing engineering with around ten years of experience. Current role involves overseeing new product introductions, ensuring that all technical documentation is created and recorded, investigation of Lean and CI projects prior to implementation of process improvements, providing engineering support to manufacturing cells and design and development of jigs and fixtures. Experience so far has been in a predominantly metal based manufacturing setup. Candidate is familiar with a wide range of tools and techniques such as value stream mapping, 5S, Poka Yoke, 8D, FMEA, Kaizen and SMED. REQUEST MORE INFO


SRSM57165 Test Technician  30K+

Degree qualified with around five years of experience within a manufacturing setup. Currently living in the West of England but keen to relocate back to the Swansea area where they completed their degree. Holds a BEng in motorcycle engineering and has also completed a welding based qualification and 17th edition wiring regulations. Current role focuses on monitoring, calibrating and performing planned and reactive maintenance on test equipment dealing with products for various industries such as automotive and rail. Open to working either shifts (as they currently do) or days. REQUEST MORE INFO


SRJT20451  Senior Quality Engineer  £38K+

Experienced quality engineer with over 20 years’ experience within manufacturing, including the automotive and oil & gas industries. A customer focused quality engineer having directly dealt with clients such as Ford, Jaguar, Land Rover, and Toyota. Highly experienced with quality management systems including ISO 9001 and TS 16949. Good experience with process tools such as APQP, and good knowledge of Lean / CI methodologies such as Kaizen, as well as holding a Six Sigma Green Belt. Ability to supervise teams and is currently responsible for 3 direct reports (2 quality engineers and 1 quality technician). REQUEST MORE INFO


SRJT21682  Senior Production Planner  £32K+             

Production Planner with over ten years’ experience within the food manufacturing industry. Is currently responsible for planning around 14million products a week, working to batch sizes, across 6 production lines in the most efficient order possible, to achieve the best OEEs. Experienced with MRP systems such as AS400 and SAP, and has played a key role in a SAP implementation project. Proficient in MS Office applications, and has a high level of experience with Excel, with the ability to use and understand complex formulas, such as INDEX and MATCH, SUMIF, VLOOKUP, HLOOKUP, SUMIFS, time formulas, as well as writing VB for application code, and spreadsheets using macros. Has management experience and had 5 direct reports in a previous role which included 4 planners and 1 administrator. Previous roles have also included, demand planning, materials planning, and purchasing. REQUEST MORE INFO


SRMRS46093  Mechanical Engineer  £25K+

Ambitious mechanical engineer with two years industry experience included hands on engineering, project management as well as involvement with customers. Well qualified holding an MSc in lean & agile manufacturing and BEng in motorsport manufacturing engineering. Covered modules such as quality control and lean & agile manufacturing, computer aided design, engineering science and materials. Fully proficient with Microsoft Office as well as SolidWorks. REQUEST MORE INFO


SRDT54961 Mechanical Maintenance Technician  £30K

An experienced mechanical maintenance technician with a vast amount of experience in planned preventative maintenance, troubleshooting and health and safety in a heavy industry environment. Has worked on a variety of machinery, including cranes, conveyors and numerous hydraulic systems. Recently completed a HNC in mechanical engineering, and holds IOSH for cargo handling in ports.  Current duties include hydraulic fault finding, routine maintenance and pneumatic installation. REQUEST MORE INFO


SRDT57294 Mechanical Maintenance Technician £30K

Recently left the Royal Marines after over 12 years in the Navy, and looking to progress within a civilian company. A mechanically biased maintenance technician who has gained technical experience in extremely challenging environments. Qualifications include  NVQ level 3 in engineering maintenance and EAL level 3 diploma in equipment maintenance engineering. Has experience in heavy industry, gained by maintaining large steering systems, various hydraulics systems and diesel generators/engines within warships. Recently qualified in the 17th edition and has an excellent eye for detail along with fault diagnosis and rectification ability.

REQUEST MORE INFORMATION


SRPS45311  Process Engineer   £35K+

A degree qualified special process engineer holding a BSc (Hons) 1st in forensic chemistry whom also obtains a Ph.D. in chemistry which focused on the chemicals utilities to coat a thin film of the fuel cell polymer Nafion onto platinum electrodes using a goniometer and optical bench. Several years of experience and lab work manufacturing single crystal electrodes coated in various polymers of intrinsic microporosity. Currently looking for in South Wales as a process engineer with the ambition to become senior process engineer. Will consider relocation if the package is right. REQUEST MORE INFORMATION


SRDT55082  Maintenance Engineer Manager £30K+

Highly qualified, experienced and dependable engineering manager with experience delivering aeronautical engineering and general engineering solutions within an austere, fast paced and multinational organisation. Over 8 years military experience within the RAF, he has an abundance of supervisory and leadership experience and has experience of managing teams of up to 20 people. He has successfully maintained panels, wings and flight control surfaces and associated hydraulic systems and coordinated engineering management tasks with other trades and agencies to deliver rectification work and aircraft on time. He is qualified up to NVQ level 2 in aircraft systems maintenance, and level 3 in aeronautical engineering; he also holds a green belt in Lean Sigma Six. REQUEST MORE INFORMATION


SRDT40629 Senior Project Leader (CEng) £42K+

A chartered engineer (CEng), with the IMechE, who also holds a PhD in a materials science/metallurgical discipline. Has extensive project management experience, has dealt with project budgets of more than £1M. Industry experience gained within the steel, automotive, aerospace and NDT industries. Technically strong with skills including 3D CAD, FE modelling, design/testing (both destructive & non-destructive) and materials engineering. Has been heavily involved in new product development (NPD) and is used to working with cross functional teams including sales and marketing. REQUEST MORE INFORMATION


SRJT56848 Junior Design Engineer £25K

HND qualified junior mechanical design engineer with over 5 years’ experience within the water treatment/manufacturing sector, with over 5 years CAD experience, mostly with Autodesk Inventor. Materials designed with include titanium steel, plastics (ABS and PVCu), sheet metal. Familiar with all technical documentation procedures, and current role involves producing Bills of Materials on a regular basis. Has good electrical knowledge having served an electrical/mechanical apprenticeship before going in to design. The candidate holds a full UK driver’s licence and is open to opportunities across South Wales and the South West. REQUEST MORE INFORMATION


SRJT41642  Mechanical Technician / Calibration Technician £22K

HNC qualified and time served mechanical technician, with over 7 years industry experience, including most recently, within a calibration lab. Competent in the calibration and repair of various torque wrenches/spanners/drivers, torque analysers and transducers, crimp tools, crane hoists, electronic scales and balances, weights, micrometres and vernier callipers. Also has experience with tools such as multimeters, oscilloscopes, and soldering irons. Has basic CAD experience with Solidworks and Autodesk Inventor as part of his HNC studies, and can read and interpret drawings. Competent user of SAP having used it for maintenance planning and schedules within a previous role. REQUEST MORE INFORMATION


SRMRS54494  Electrical Maintenance Technician  £35K+

An experienced electrical maintenance technician with just over 11 years within heavy industrial manufacturing environments and the water industry. Familiar with dealing with both reactive and planned preventative maintenance duties. Also, capable of fault finding and making amendments on various PLC systems. Time served holding an HND in engineering, HNC in electrical engineering and 17th edition wiring regulations. Keen to find a new role to enable them to continue to develop their skills further REQUEST MORE INFORMATION


SRMRS44806  Electrical Maintenance Technician  £35K+

Ambitious electrically biased maintenance technician with experience in various heavy industrial environments. Time served holding an NVQ Level 4 in engineering leadership and management and currently part way through studying for a degree in electrical and electronic engineering. Holds high voltage qualifications and capable of switch up to 11kv and has switched up to 33kv with supervision. Good continuous improvement knowledge and currently working towards their Black Belt. Has experience using Allen Bradley and Siemens PLC’s. Keen to find a new role that will allow them to develop their knowledge further and that is a commutable distance of Neath. REQUEST MORE INFORMATION


SRMS41660    Project / Quality Engineer  £25K+

Degree qualified engineer with around 3 years of experience within technical / manufacturing environments. Originally started career within a quality control and design focused role before moving into a project engineering position inclusive of calculation work, engineering drawing production and document control. Holds a BSc in automotive engineering and has gained experience of working with ISO9001 as a quality standard. CAD experience with AutoDesk Inventor and SolidWorks and is fully proficient in all Microsoft Office applications. REQUEST MORE INFORMATION


SRMS44426  Continuous Improvement Engineer  £28K+

Professional engineer with over 30 years of experience within a variety of manufacturing environments. Originally starting out as a maintenance fitter before moving on to work within production engineering, quality and CI. Has worked within plastics and electronics environments and holds a “Lean Six Sigma Green Belt” and NVQ Level 3 in business improvement techniques. Recent achievements have included a £75,000 saving on material spend, 72% reduction in tooling changeover times and a reduction in scrap rates of over 4% down to under 0.5%. Keen to find a lean / CI focused position to utilise their skills and available for an immediate start. REQUEST MORE INFORMATION


SRMS56602  Production Team Leader  £27K+

Production supervisor with around 10 years of experience within plastics manufacturing environments. Good all-round understanding of plastic manufacturing processes having undertaken production technician focused work within career. Used to supervising up to 10 staff and working a variety of shift patterns having responsibility for delegating workloads, quality control, ensuring best practice is maintained, delivering training as required and ensuring KPIs are met (scrap, output, etc.). has recently relocated to South Wales area and is keen to find a suitable supervisory role to bring their skills and experience in to. REQUEST MORE INFORMATION


SRMS38878   Project Engineer  30K+

Degree qualified engineering professional with 6 years of industry experience in project and manufacturing engineering focused roles. Holds a BEng in mechanical engineering and has worked mainly in oil & gas sector. CAD experience with SolidWorks and AutoCAD and is familiar with having customer contact as part of a role. Experienced in costing and estimating processes dealing with contracts of up to £400K in value and used to negotiating contract terms. Used to undertaking various engineering calculations and managing bills of materials and other documentation. Looking for a new role and challenge within a commutable distance of the Newport area. REQUEST MORE INFORMATION


SRJT22204  Internal Sales / Bid Engineer  £30K+

Internal sales / bid engineer with over 3 years’ experience in formulating and delivering sales initiatives within large corporate and SME companies, as well as organising sales strategies, identifying bids and negotiating orders. Has dealt with bids ranging in value from £100 – £90,000, and current role involves the research of competitor products / projects, and how to deliver a pricing strategy. Experienced in dealing with technical queries from clients from all over the world, including the Middle East, and has utilised modern online bidding portals, as well as more traditional methods via email. Degree qualified in the field of engineering holding a 2:1 honours bachelor of engineering. REQUEST MORE INFORMATION


SRMRS51371 Electrical & Electronics Engineering £22K+

Ambitious recent graduate, currently awaiting their results and expecting a first in electrical & electronics engineering. Prior to starting their studies, completed a formal modern apprenticeship in electrical/electronic engineering and has 6 years’ experience in technical roles. Experienced maintaining various electricals equipment including motors, drives and PLC’s. Also holds 17th edition wiring regulations and is now looking to further their career within manufacturing. REQUEST MORE INFORMATION


SRJT55446  Manufacturing Engineer  £32K

Around 10 years of experience within engineering focused roles and degree qualified holding a BEng in Mechanical and Manufacturing Engineering. Familiar with the design and development of tooling and manufacturing lines as well as prototyping and 3D printing processes, utilising SolidWorks. Involved in large installation projects, and the commissioning and decommissioning of machinery. Has led process improvement projects and has excellent lean / CI knowledge, utilising principles and tools such as 5S / 6S, Kaizen, Kanban, and Value Stream Mapping….REQUEST MORE INFORMATION


SRJT34601  Electrical Engineer / Supervisor £45K

Experienced electrical engineer with over 18 years’ experience of working within highly regulated pharma / medical device environments, holds a HNC in Electrical and Electronic Engineering. Used to working to tight regulations within clean rooms and a contained manufacturing facility, working to GMP and FDA standards. Has led preventative maintenance strategies and has excellent knowledge of lean / CI, implementing changes to improve scrap and OEE. Has project managed the installation of new production lines and has extensive people management experience, managing teams of 5 Technicians on average. Competent PLC programmer, worked with brands such as Siemens and Allan Bradley….REQUEST MORE INFORMATION


SRMS53921  Electronics Design Engineer  £30K+
Degree qualified electronics design professional with 3 years of post-graduate experience. Holds a first class degree in electrical & electronic engineering covering modules such as analogue circuit design, digital circuit design, software engineering and power electronics. Current role involves analogue electronics design and evaluation, power electronics and the thermal evaluation of electronic components. Some experience of hands on PCB design utilising Proteus. Experienced in being customer facing as part of current role and also liaising with external subcontractors. Currently working away in the West of England and keen to find a role based within South Wales…REQUEST MORE INFORMATION


SRMS53982  Graduate Automotive Engineer  £20K+

Recent graduate holding a BEng motorsport engineering and design looking for an opportunity to get into a design focused role within manufacturing. Modules covered as part of degree include advanced computational methods, computer aided engineering design, electronics in engineering and engineering science. CAD experience with SolidWorks and also proficient in all Microsoft Office applications. Final year project focused on analysing and optimising a four cylinder engine and presenting a technical report to display a full understanding of how the engine functioned…REQUEST MORE INFORMATION


SRMS53986   Engineering / Project Manager   £55K+
Degree qualified chartered engineering professional with around 30 years of experience within technical / manufacturing environments predominantly dealing with high volume cradle to grave consumer electronic product development. Most recent role involved leading a team of engineers in the design of products overseeing the entire process and ensuring successful delivery to market. Holds a BSc in electronics engineering and has worked for some globally recognised brands. Familiar with budget management and has also managed teams overseas overseeing global development functions. Currently based in England but willing to relocate to South Wales after a recent redundancy…REQUEST MORE INFORMATION


SRJT53229    Electronics / Electrical Engineering Graduate  £20K+

A recent graduate holding a 2:1 BEng in electrical and electronic engineering that is looking to pursue a professional career within the manufacturing and electronics industries in the South West and South Wales area. Has 3 months industry experience outside of university and has PCB design experience including both analogue and digital. He is advanced in the use of software such as Proteus and is intermediate with tools such as Matlab and Simulink. Has experience of soldering and desoldering, and also possesses excellent programming skills, being proficient in C and C++…REQUEST MORE INFORMATION


SRMRS53131 Materials Science and Engineering Graduate £Neg

Recent graduate with a MEng materials science and engineering and 12-month industrial internship with Airbus Operations Ltd as a metallic technology – materials, processes & test engineering intern. Which involved providing material expertise, liaising with suppliers, qualification projects and producing reports and technical documentation. Dissertation project involved investigating the development of dual phase steel strips for use in the automotive industry. Has covered various modules such as polymer processing, aerospace materials engineering, power generation systems, additive manufacturing, simulation based project design and physical metallurgy of steel. Has experience using Solidworks, MATLAB, Hypermesh and Fortan 90/95…REQUEST MORE INFORMATION


SRMS51831  Mechanical Manufacturing Engineer  £33K+

Degree qualified manufacturing engineer with 6 years of industrial experience. Current roles focuses on making changes to improve overall plant availability within their specified area and is familiar with being involved in projects liaising with other departments when required. Holds a BEng in mechanical engineering (2:1) with a project which focused on creating a maintenance strategy within a heavy industrial environment. Also holds an IOSH certificate, level 3 in business leadership management and is an associate member of the Institute of Mechanical Engineers. Proficient in the sue of SAP, SolidWorks and all Microsoft Office applications…REQUEST MORE INFORMATION


SRMS53148  Product Design Engineering Graduate £20K+

Graduate holding a first class degree in the field of product design engineering (BEng). 12 months of industrial experience gained via a placement working as a technical engineering assistant undertaking duties such as producing technical drawings, 3D renders, engineering calculations and responding to technical enquiries. CAD experience with SolidWorks and AutoCAD and also has a basic knowledge of Inventor. Has also gained experience with 3Ds Max and is proficient in the use of all Microsoft Office applications. Would make an excellent addition to any product design / R&D function…REQUEST MORE INFORMATION


SRMS51723  Mechanical Maintenance Engineer  £34K+

Mechanical maintenance professional with around 6 years of experience within a heavy industrial environment. Time served holding a HNC in mechanical engineering and gaining NVQ Level 3 in fitting and machining, a City & Guilds in MIG and TIG welding and a national certificate in machining from this. Recently completed a degree level qualification in mechanical engineering (BSc) with first class honours. Current role involves engineering support of a manufacturing line with a focus on problem solving, planned maintenance, improvements and project work. Would make an excellent addition to any manufacturing environment within a manufacturing/maintenance focused role…REQUEST MORE INFORMATION


SRMS53073  Technical Engineering Manager  £40K+

Experienced senior engineering professional with around 30 years of experience in varying manufacturing / product development setups. Originally started out as a trainee draughtsman gaining a HND in mechanical & production engineering has gained experience at a senior level as a drawing office manager, engineering manager and quality manager. Achievements with current employer included managing and maintaining ISO9001 accreditation and effectively reducing obsolescent stock by 15% via design management activities. Currently relocating to the Swansea area from Berkshire and is keen to bring their level of knowledge and experience to a new environment…REQUEST MORE INFORMATION


SRMRS53009 Mechanical Engineering Graduate £Neg

Recently graduated with a 2:1 in mechanical engineering BEng from Exeter University with an interest in energy and renewable energy among other sectors. Having completed his studies and moved back to South Wales, he is now keen to find an engineering role in South Wales to apply what he has learned throughout his studies. Also has experience using MATLAB, SolidWorks, AutoCAD and ANSYS Workbench and all of Microsoft Office applications…REQUEST MORE INFORMATION


SRMS52426  Electrical Maintenance Technician / Team Leader   £34K+

Electrical maintenance professional with around 28 years of experience within food, automotive, FMCG, electronics and heavy industrial environments. Time served holding an ONC in electrical / electronic engineering and holds 17rth edition wiring regulations. Familiar with working within heavily automated environments and has PLC fault finding skills with Siemens S7 and Allen Bradley brands. Also has mechanical maintenance ability with pneumatic and hydraulic systems. Keen to find a hands on role and has team leader supervisory experience also. Would consider days or 2 shift pattern…REQUEST MORE INFORMATION


SRMS33033  Quality Engineer / Senior QA   £35K+

Degree qualified quality professional with around 15 years of experience within quality and laboratory focused roles. Holds a BSc in biochemistry and has worked within medical device, pharmaceutical and life science environments. Used to being involved in the coordination and implementation of quality management systems within highly regulated environments and the investigation and closure of customer concerns. Experienced in creating validation protocols and having involvement in audit processes (both internal and external). Looking for a role around the Swansea / Neath Port Talbot / Carmarthenshire areas and would make an excellent addition to any highly regulated industry…REQUEST MORE INFORMATION


SRMS52676  Electrical Maintenance Technician     £25K+

Ambitious electrical maintenance technician with around 3 years of post-apprenticeship experience and around 7 years of total experience within manufacturing environments. Currently working within a heavily automated environment and holds a foundation degree in electrical engineering (HND equivalent) along with 17th edition wiring regulations. Familiar with dealing with both reactive and planned preventative maintenance duties. Keen to find a new role to enable them to continue to develop their skills further and would be a useful addition to for an employer to add to any maintenance team and look to develop within their environment…REQUEST MORE INFORMATION

 

SRDK27209  Quality Engineer     £38K+

Experienced quality engineer with an OND in mechanical & production engineering and extensive experience gained within the automotive sector. Their experience includes an in depth knowledge of PFMEA and FMEA, working with APQP and PPAP documentation daily in current role, good knowledge of using 3C as a pre-emptive tool and 8D to investigate issues and customer concerns, good knowledge of data control and utilises Minitab for analytical purposes, experience of creating control plans, used to hosting internal quality audits & has also undertaken supplier auditing training. The candidate has also gained experience of introducing and implementing a QMS (ISO 9001/TS 16949) in previous roles…REQUEST MORE INFORMATION


SRDK34749  Quality Engineer    £33K+

Driven quality professional with extensive experience gained in ISO 9001 manufacturing environments who is also a BSI qualified ISO 9001 Auditor. Currently responsible for analysing all aspects of quality compliance both in terms of processes and product whilst also being responsible for investigating customer returns. This process would include analysing the fault and complaint and working on the root cause of the issue to ensure that the same issue / fault does not occur again. This would be achieved this through the utilisation of modern techniques such as 8D investigations and reporting…REQUEST MORE INFORMATION


SRMS44014  Production Planner  £34K+

Experienced planner with around 17 years of production / materials focused roles within a range of industry sectors (FMCG, automotive, electronics, metal/fabrication, medical device, etc.) Originally started out within a chemistry focused role prior to progressing to a supervisory level and moving across in to planning. Has some supervisory experience within a planning capacity but has managed up to 40 staff in the past. Experience has ranged from around 40 SKUs within a manufacturing cell setup up to 350 SKUs across 5 production lines. Familiar with a range of MRP systems such as SAP, BAAN, Dynamics and Syteline and is used to utilising and working within Kanban setups…REQUEST MORE INFORMATION


SRMS52362   Technical Engineer  £30K+

Graduate engineering professional on course to obtain chartered status. 3 years of post-graduate experience working with a company providing technical expertise and services mainly to the aerospace and defence sectors. Holds a BEng in aerospace engineering (2:1) and originally started out in a design focused role before moving into a lead role providing technical advice, guidance and support to clients. Currently relocating to the Cardiff area and keen to find a commercial / project focused role to continue progression of their career. Would make an excellent addition within a customer facing role for a wide array of different organisations…REQUEST MORE INFORMATION


SRDK43643 Quality Engineer £35K+

Very experienced quality professional who is a chartered quality professional with extensive experience gained within the electronics and now the aerospace sector. Qualified internal ISO 9001 auditor with extensive ISO 9001 experience, also has ISO 14001 (environmental) and AS9100 experience. Experience includes being heavily focused on reacting to and investigated customer issues and complaints through to resolution within his current role, and developing processes and reporting structures in order to achieve NADCAP certification…REQUEST MORE INFORMATION


SRJT52083 Quality Coordinator (Food) £25K+

An experienced quality coordinator with over 5 years quality experience within the food industry. The candidate is relocating to Newport and is looking for suitable opportunities in the South Wales and South West region. The candidate has worked to BRC standards and holds a HACCP advanced qualification. Her current role mainly involves supplier quality but she is involved in all quality processes – client, production and audits. She has also dealt with leading blue-chip retailers such as such as Tesco, Aldi, and Lidl…REQUEST MORE INFORMATION


SRJT48040 Senior Mechanical Design Engineer £37K+

A highly experienced mechanical design engineer with over 25 years design experience within the manufacturing sector. Holds a HNC mechanical & production engineering and has worked in a range of different manufacturing environments including automotive, aerospace and oil & gas. Has over 4 years’ experience of using Solidworks but has also used other CAD packages such as CATIA and Unigraphics. He has undertaken project management in many of his positions and enjoys working in diverse teams with quality, manufacturing, projects, electronics and electrical engineers, to provide support to new product development processes from research and development, through to commercial launch…REQUEST MORE INFORMATION


SRDK51523  Inventory Planner/Expeditor  £18K+

Ambitious individual with a business administration level 3 diploma (NVQ) and experience gained within the automotive and aerospace sector. The candidate possesses exceptional planning and organisational skills and is used to working to tight deadlines in pressurised environments. Highly computer literate with particular expertise in the usage of SAP in a variety of capacities such as monitoring absence and controlling stock levels. A customer focussed individual looking to further their career in a progressive manufacturing organisation…REQUEST MORE INFORMATION


SRDK51379  IT Systems Lead  £45k+

Experienced IT professional who is looking for a fresh challenge following relocation to Wales for family reasons. Currently responsible for the IT infrastructure of 15 physical and 40 virtualised servers, 2000 end users over 3 separate sites. Experience includes recently built and configured a windows 2012 R2 server using RAID controllers and different RAID set-ups from 0-10 dependent on the requirements of different departments, good knowledge of active directory, extensive experience of managing security & anti-virus settings, configuration of all Microsoft Windows from 3 up to & including 10, configuration and set-up of Microsoft Windows Server 2012/R2, 2008/R2, & 2003. Currently on a 3 month’ notice contractually but given his situation is confident could negotiate this down considerably…REQUEST MORE INFORMATION


SRJT50589  Instrument Technician  £23k

Experienced instrument technician, holding a HNC in instrumentation engineering and currently completing a HND in electrical / electronic engineering. Over 5 years of experience within a technical environment and has worked with a wide range of instrumentation such as Emerson Delta V, Rosemount (has been involved in upgrade projects to Delta V), and TDC Honeywell Control Systems. Currently working as part of an international company, carrying out reactive maintenance in response to daily issues and conducting preventative maintenance in correspondence with company procedures, including critical instrumentation and checking functionality of ESD systems…REQUEST MORE INFORMATION


 

SRMS51177 Draughtsperson  £25K+

HNC qualified draughtsperson with 8 years’ experience within technical and manufacturing environments. Has worked on the design of steam turbines, piping layouts, valves and actuators utilising both 2D (AutoCAD) and 3D (ProEngineer) packages. HNC in mechanical engineering having completed a technical apprenticeship with a global blue chip organisation and also has a Level 3 NVQ in engineering technical support and a Level 2 NVQ in supporting engineering activities. Currently being made redundant and is relocating to South Wales where their partner is originally from (Swansea area) and also has £1,000 available for training as part of redundancy package….REQUEST MORE INFORMATION


SRMS51133 Electrical & Electronic Engineering Graduate  £22K+

Electrical & electronic engineering student about to complete their degree (April time) and is predicted a 2:1. Modules covered include control system engineering, configuration & programming of embedded systems and electronics design and projects have involved design of an autonomous vehicle using embedded C (group project) and is also currently using C# within a .net framework for their final year individual project. 4 years of experience gained while undertaking degree working with a company involved in the installation of monitoring systems. Experience with Mitsubishi PLC systems inclusive of some design of systems and has attended a wide range of training with them….REQUEST MORE INFORMATION

SRDK51057  Production Team Leader  £21K+

Ambitious production ream leader currently working within the automotive sector and responsible for supervising a team of 18 people with responsibility for ensuring the shift runs as productively as possible and all staff members are hitting KPI’s such as quality, safety and performance. The candidate is highly motivated, responsible, adaptable, hardworking and conscientious with an exemplary record of time keeping over 23 years of working experience…REQUEST MORE INFORMATION


SRDK42040  Engineering Manager £45K+

Vastly experienced engineering manager with a wealth of experience gained within the automotive sector. Has held responsible for a team of 27 engineers actively engaged in all aspects of engineering including process, NPI, quality, and maintenance. Very adept in modern manufacturing techniques such as JIT, CIP, 5s, Kaizen, TPM, cost control, NMI, KPI business management, and Practical Problem Solving (PPS). In addition, the candidate has also controlled budgets and has managed many large scale cap ex projects. A proven achiever with a consistent track record gained within a tier 1 automotive manufacturing environment…REQUEST MORE INFORMATION


SRMS49195 Electrical / Electronic Engineering Graduate £23K+

Degree qualified electrical / electronic technician with 5 years of experience within a manufacturing environment. They have recently completed their BSc in electrical / electronic engineering and are keen to move on from current role to progress themselves and develop their skills further. Current role involves electrical safety testing, PCB design and investigation and carrying out EMC testing. Previously has completed an apprenticeship obtaining a HNC in electrical / electronic engineering. Looking to move their career more towards electrical / electronic product design and would make a great addition to any development team…REQUEST MORE INFORMATION


SRMS46805 Production Supervisor / Shift Manager £30K+

Experienced production supervisor, currently working shifts within a tier one automotive environment, looking to develop themselves further or take the next step in their career. Would consider a role on days or shifts dependent on location and scope for development. 14 years of experience gained within a variety of manufacturing environments dealing with sheet metal, pressed metal and plastic injection moulded environments. Responsible for around 40 staff within current role and is familiar with lean tools such as 5S, DMAIC and FMEA. Holds an IOSH managing safely along with an ILM Level 3 qualification in leadership and management…REQUEST MORE INFORMATION

SRMS51117 Sales / Project Engineer £30K+

Engineering professional with around 10 years of experience within technical and manufacturing organisations. Varied experience gained as a costing engineer, a project engineering focused role, sales management overseeing a team of office based sales people and currently undertaking a commercial role working with clients to formulate technical specifications and quotations and working to secure the business for the organisation. Holds a Diploma in management and leadership and is currently completing an ILM qualification. Keen to find a new challenge within either a commercially focused position within a technical environment or a project engineering role…REQUEST MORE INFORMATION


SRDK21112 HSE Advisor £35K

Health and safety professional currently working within heavy industrial environment. Currently responsible for all aspects of health and safety Including COSSH assessments, risk assessments, accident investigation, the development of emergency procedures, and control of contractor safety.

Currently holds a NEBOSH national certificate and is currently working towards an NVQ Level 5 in occupational health & safety management…REQUEST MORE INFORMATION


 

SRDK41704  NPI Engineer  £30K

Driven NPI engineer with extensive experience within the automotive sector and originally trained as a time served toolmaker. Good knowledge of a wide range of NPI processes including creating work instructions & control plans, holding cross departmental project meeting, APQP, tooling design, developing jigs and fixtures, and close liaison with the design team and other departments regarding final product design. The candidate has also gained experience of end of line production testing and is currently looking for an opportunity to further their career in a progressive environment…REQUEST MORE INFORMATION


SRMS39574  Senior Maintenance Engineer  £37K+

Degree qualified engineering professional with experience of working within chemical and heavy industrial environments. Good multi-skill knowledge and ability having originally undertaken an electrical apprenticeship gaining a BTEC in electrical engineering and a HNC in instrumentation and control before moving on to complete a BEng in mechanical & manufacturing engineering. Supervisory experience over a team of 6 staff and has led capital expenditure projects within maintenance environments. Would make an excellent addition to a large maintenance team within a senior / supervisory capacity or is capable of a maintenance manager role within a smaller setup…REQUEST MORE INFORMATION


SRMS50577  Automation Engineer  £40K+

Degree qualified automation and maintenance professional holding a BSc in mechatronics. Currently working within a fast moving metal based manufacturing environment and has worked within the automotive sector previously. Current role involves technical support for site, project managing of new equipment purchases, robot programming and the electrical design, build and installation of new control systems. Experience with SCADA, PROFIBUS, Fanuc, Mitsubishi and Siemens systems and has undertaken training for the programming of various PLC and robotic systems. Keen to move on to find a new challenge and would bring very good skills to automated manufacturing environments….REQUEST MORE INFORMATION


SRMS32583  Mechanical Design Engineer  £32K+

Degree qualified design engineer with 14 years of experience within FMCG, civil and oil & gas environments. Used to working with a range of metals from a design perspective and has CAD experience with various systems including AutoCAD (2D & 3D), StudioWorx (3D) and Bentley Prosteel. Holds a BA in industrial design along with an ONC in construction technology and has experience of compiling BOMs and material parts lists as part of a role. Keen to find a role based within South Wales as they are currently commuting to the Gloucester area…REQUEST MORE INFORMATION


SRDK50715 Sales Engineer / Account Manager  £35K+

Driven and enthusiastic sales professional with vast experience of selling products in to the automotive sector who holds a degree in mechanical engineering. Is currently working in an NPI capacity within the automotive sector which highlights both his engineering capacity and also his customer handling capabilities. Achievements include increasing account sales value from €75 million Euros to €210 million. The candidate is also a fluent French and German speaker and is able to convers and conduct business in both… REQUEST MORE INFORMATION


SRDK48105 Senior Design Engineer/Manager  £50K+

Experienced lead/senior electronics design professional with a BEng in electrical and electronic engineering and experience gained in the consumer electronics industry. The candidate has experience of both digital and analogue electronic design, knowledge of PCB layout and schematic design, experience in designing for EMC compliance, and is very strong at technical documentation completion and control. An innovative thinker looking to integrate their skills and expertise into a dynamic and challenging new business role…REQUEST MORE INFORMATION


SRDK50497 NDT Engineer  £30K+

Experienced NDT professional with 7 years’ experience of NDT testing who hols PCN Level 3 in ultrasonic, PCN level 2 in dye penetrant, PCN level 2 in magnetic particle, & PCN level 2 in eddy current testing. Diverse range of experience which includes various forgings and castings as well as specialist components for motor racing. Currently looking for an opportunity to advance their career following on from obtaining their level 3 PCN qualification in UT and is also studying a foundation degree in NDT (via distance learning)…REQUEST MORE INFORMATION


SRDK42363  Lead Engineer  £45K+

Proven and established engineering professional who holds a degree in manufacturing systems engineering and experience gained with the automotive and heavy industrial sector. Diverse & specialised experience which includes manufacturing engineering, prototype development, process and assembly improvements, quality engineering, industrial engineering, supplier quality development, lean process implementation and maintenance system analysis. Currently working within the steel sector and is concerned about the long terms stability of the industry sector and seeking a new position as a result…REQUEST MORE INFORMATION


SRDK50138  NDT Level 3 Technician  £35K+

Experienced NDT professional who holds ASNT NDT level III UT qualifications as well as NDT level II qualifications in (ECT, MFL, RFT, IRIS). Has experience in the petrochemical & aerospace sectors working to multiple regulations including NADCAP. An ambitious candidate currently looking for a new position following a long period of being based in the Middle East…REQUEST MORE INFORMATION


SRMS50192  Maintenance Technician (Electrical)  £22K+
Electrical / electronic professional whose current role involves repair, inspection and testing of finished goods keen to move career towards a fully maintenance focused position. Around 6 years of relevant experience and is available at short notice due to an impending redundancy. Has completed a foundation degree in electrical / electronic engineering and is currently undertaking a degree level qualification in the same subject (requires a Thursday afternoon off work to complete – currently predicted a 1st class degree). Also holds a NVQ Level 3 in electrical and electronics service, repair and maintenance. Comes across well and is open to all shift patterns…REQUEST MORE INFORMATION


SRMS44027  Test Technician  £20K+
Electronics / electrical test technician with around 8 years of experience working within technical roles and the manufacturing sector. Recent role has involved hands on testing and assembly of products, developing of testing procedures, Root cause analysis and providing client technical support. Holds a HNC in electrical & electronic engineering and is currently completing the HND level in the subject (due to finish May 2016 – requires every Tuesday off to complete and happy to work hours back on other days and on weekends as required). Available at short notice due to redundancy and would make an excellent addition to any electrical / electronic focused manufacturing setup….REQUEST MORE INFORMATION


SRMS50171  Production Supervisor / CI Specialist   £30K+
Masters qualified manufacturing professional who has completed a graduate scheme with a global blue-chip company. Around 2 years’ of experience gained within the food manufacturing sector and working on multiple sites becoming familiar with different environments as part of their graduate scheme. Time spent working as a shift manager for a 7 month period managing a team of 17 staff. Excellent continuous improvement focus and has used (and implemented) the use of tools and used processes such as TPM, SMED and DMAIC amongst others. Masters qualified in the field of environmental geoscience and has completed a food safety level 2 qualification also…REQUEST MORE INFORMATION


SRMS40665 Quality Engineer  30K+
Degree qualified quality engineer with around 3 years’ of experience since completing their studies. Experience gained within automotive and metal based manufacturing environments and is keen to find a role based within South Wales as they are currently working away Monday to Friday. Holds a BSc in motorsport technology along with a HND in automotive engineering and has worked both directly with an OEM and in a tier one environment. Familiar with processes such as FEMA and APQP as well as using tools such as SPC and root cause analysis. Would make an excellent addition to any quality team. REQUEST MORE INFORMATION


 

RMS49150  Electronic Engineering Graduate £20K+

Enthusiastic and ambitious recent graduate holding a BEng in electrical and electronic engineering (2:2) keen to find their first role within industry. Has covered a wide variety of areas as part of degree in areas such as PCB design and electronic theory and their preference is to move in to an electronics focused position. Has experience with fault finding to component level and soldering from degree as well as using a variety of relevant software such as Proteus and Multisim. Basic knowledge of programming languages such as C and MatLab and proficient in the use of all Microsoft Office applications. Would make an excellent addition to any electronics focused environment….REQUEST MORE INFORMATION


SRDK20692  Engineering Manager / Planner  £35K+
Experienced senior engineering professional who is currently working in a heavy industrial manufacturing environment. The candidate has gained a number of years’ experience working with steel/metal based manufacturing and engineering processes having started as an Apprentice in steel manufacturing and worked their way up. Their current position is centred around planning engineering & manufacturing processes in terms of ensuring labour, tooling, and maintenance projects align with business expectation. Strong knowledge of SAP and has utilised and used a number of modern CI and Lean techniques such as 5S elements of Six Sigma, JIT methodology and RFT… REQUEST MORE INFORMATION


SRDK49958  Design Engineer  £23K+
Mechanical engineering graduate with 14 months’ work based experience as a design engineer within the automotive sector using plastic (injection moulding) and sheet metals. The candidate has experience of Siemens NX9 as a 3D CAD package in a work capacity and has also used SolidWorks and AutoCAD during their studies. Looking to further their design based experience in a forward thinking manufacturing environment….REQUEST MORE INFORMATION


SRDK49407  Mechanical Design Engineer  £28K+
Design engineer with an MSc in advanced product design and graphic communication and a BA (Hons) in product design. 3D design experience using SolidEdge mainly and also SolidWorks with some Catia to a lesser extent in his current position. Experience of designing medical devices and also products to assist the visually impaired. Good understanding and appreciation of plastic injection mould processes and currently available immediately following redundancy from his previous role due to the closure of the office. Recently relocated back to south wales from the south east and has his own transport …REQUEST MORE INFORMATION


SRMS41917 – Engineering / Maintenance Manager – £40K+
Experienced and ambitious senior engineering professional with 17 years’ experience within manufacturing. Has worked within a global blue chip electronics manufacturing environment prior to moving into managerial roles within the food manufacturing sector. HNC qualified in mechanical engineering and currently completing a degree in this field on a part time basis. Responsible for a team of 12 and has implemented PPM systems (non-computerised) within their last 2 companies. Good focus on continuous improvement utilising tools such as SMES, 5S and TPM and has experience of working with a wide range of equipment..REQUEST MORE INFORMATION


SRMS15312 – Production Planner – £28K+
Degree qualified planning professional currently undertaking a senior production planner role within a role that is a division of a large global blue chip company. Keen to move on to find a new challenge due to a large amount of the workload being moved to a different site overseas. Degree qualified in the field of business economics and has a good amount of experience with MRP systems including SAP (Super user status) within current role. Achievement wise has successfully planned a move taking several manufacturing centres in to one central hub and created a 48.5% increase in customer on time order completion…REQUEST MORE INFORMATION


SRDK44380 – Shift Manager – £44K+
Experienced senior manufacturing professional with a HNC in mechanical engineering and experience within the automotive and heavy industrial sector. Has managed teams of up to 55 people in total and has used a number of modern continuous improvement tools and techniques such as 5S & Kaizen. A key achievement obtained using these methods was an increase in the manufacturing volume by 50% by changing and standardising processes. Has experience of both ISO9001 and TS16949 quality management systems and has done some auditing to both these systems internally…REQUEST MORE INFORMATION


SRDK26140 – Electronics/Software Engineer – £34K+ 
Experienced electronics design and software development professional with an MSc in electronic product design. Skilled in the design of both hardware and software with a proven track record in designing technical solutions to meet customer requirements. Experienced in the design of both digital and analogue circuits utilising through hole and surface mount technology with knowledge of PCB layout and EMC design. The candidate has also developed embedded software using embedded ‘C’ and has also gained windows software development experience using Visual Basic, C++, VBA and .Net Framework… REQUEST MORE INFORMATION


SRDK25044 – Mechanical Design Engineer – £28K+
Experienced design engineer with a BTEC HNC in general engineering and 6 Years’ experience producing complex 3d designs using AutoDesk Inventor. The candidate has knowledge of designing special purpose machinery and is used to working in conjunction with both electronic design and software develop teams in order to finish final product. They are currently available immediately due to redundancy…REQUEST MORE INFORMATION


SRRW49098 – Toolmaker  – £30K+
Timeserved toolmaker / CNC miller, turner with more than 15 years’ experience in industry. Knowledge has been gained across the automotive (tier 1), plastics and high specification metals sectors. Candidate is familiar with Fanuc, Mazatrol, Heidenhain controls with experience of working from both 2D and 3D drawings…REQUEST MORE INFORMATION


SRJB34233 – Toolmaker – £26K+                                                                                                                      

Experienced toolmaker with a HNC and ONC in manufacturing & production engineering. Proven track record of success and experience gained in the automotive (tier 1), food and packaging sectors. Working to tight deadlines and with no supervision the candidate has manufactured jigs and fixtures for production use, as well as liaising with a development department in Europe for testing of new products. Experience of working with milling, turning, grinding and erosion machinery…REQUEST MORE INFORMATION


SRJB27549 – Toolmaker – £26K+                                                                                                                    

Highly skilled and experienced toolmaker with over 30 years’ experience in the manufacturing industry. Has worked across a range of sectors including, aerospace, automotive, and plastics. The candidate is very reliable and is used to working to tight tolerances in highly regulated industries. Comfortable working with a wide range of machinery which includes milling, grinding, turning, lathes and jig borers…REQUEST MORE INFORMATION


SRDK49162 – CI / Lean Manufacturing Leader – £50K+
Lean manufacturing and continuous improvement specialist holding a BEng (hons) in manufacturing systems, engineering and management and a Six Sigma Black Belt. Proven track record of achievement including instigating savings of £5m in an 18 month period through the management and roll-out of a continuous improvement program using process mapping, Kaizen and 6 Sigma techniques. Other achievements include reducing engineering down time by 205, leading and facilitating over 20 kaizen events all resulting in reduced waste improved lead time and better performance, and the reorganisation of production layout saving 20% worth of space. Currently looking for a fresh challenge within a manufacturing environment and available at fairly short notice…REQUEST MORE INFORMATION


SRMS49244 – Test Technician/Graduate Software Developer – £30K+
HNC qualified (electronic engineering) electronics / software professional currently looking to relocate to the South Wales area and keen to find a software / web development opportunity to develop their skills further. 7 years of experience gained within military / MOD environments undertaking test technician positions including supervising a team of 5-10 staff. Currently undertaking a BSc computing and IT: software development degree qualification and has experience with a range of languages such as VB.NET, Python and SQL. Currently developing skills with C# and ASP.NET. Current role involves troubleshooting and fixing windows and web based application issues…REQUEST MORE INFORMATION


SRMS48494 – Materials Engineering Graduate – £28K+
Graduate currently completing a doctorate in materials engineering having undertaken a post as a research engineer within a South Wales based university for the last 5 years. Also holds an MRes in steel technology and a 1st class BEng in product design technology. Research has focused in the areas of corrosion mechanisms and inhibitors of certain alloys. Keen to utilise their skills within a product development / R&D environment where they can use their mix of skills to develop products to meet customer requirements. Would make an excellent addition to any materials / metallurgical / metals based manufacturing environment and is available to take up a position from September 2015…REQUEST MORE INFORMATION


SRMS48532 – Electrical Maintenance Technician – £26K+

Maintenance technician who has recently relocated to South Wales area from North Wales and will be based from the Cardiff area shortly. Time served holding a NVQ Level 3 in electrical and electronic maintenance as well as a BTEC Level 3 in electrical engineering. Good multi-skill ability and is used to undertaking and assisting with mechanical work on pneumatic and hydraulic equipment. Heavy industry experience gained working within power station environments and has gained PLC fault finding experience. Has maintained equipment such as electrical and power distribution systems, motors and control systems. Dependent on location would consider £26K+ for a days based role or £30K+ for shifts (preferably 2 shift or 3 shift pattern)… REQUEST MORE INFORMATION


SRCH48063 – Electronic Systems Engineer – £23k+

Engineer who holds a first class honours BEng computer and communication systems engineering degree. Experience working with a variety of languages including C, C++, C# and Pascal / Delphi. Has a familiarity with both Verilog and VHDL for HDL development targeting FPGAs. Since graduating has over 3 years industry experience undertaking test engineering, development of new tests and independently developed a system to measure current draw in a device during power up. This candidate is available to start employment immediately… REQUEST MORE INFORMATION


SRMS48664 – Materials Engineer – £30K+

MRes qualified in the field of materials engineering and having undertaken work as a research associate before moving in to industry. Modules covered during studies included surface engineering and coatings, fatigue, environmentally-assisted degradation, Microscopy and analytical techniques, effective management and business strategies. Most recent role involved working in a testing laboratory undertaking failure analysis, mechanical testing and corrosion testing. Currently looking to relocate from the Birmingham area as their partner is going to be studying at Cardiff University and is keen to find a position which will allow them to develop their skills further while allowing them to utilise their experience to date… REQUEST MORE INFORMATION


SRMS48682 – Quality Engineer – £35K+

Degree qualified quality professional currently looking ideally for a role in the Bridgend area to relocate closer to family. 17 years of experience within a number of sectors including the Automotive and plastic injection moulding sectors. Used to working with tools such as 8D, PPAP and FMEA along with Lean Manufacturing tools such as SMED and 5S. Qualified Six Sigma Green Belt and is currently working within a senior role. Skilled with new product introduction (NPI), engineering change management, quality systems management and project management. Internal Auditor for TS16949. Candidate would make an excellent addition to the quality function of a wide range of manufacturing environments…REQUEST MORE INFORMATION


SRMS46647 – Electrical Maintenance Technician – £25K+

Ambitious and fresh electrical maintenance technician currently completing their apprenticeship within a fast moving and reasonably industrious manufacturing environment. Candidate will hold a BTEC Level 3 diploma in electrical / electronic engineering shortly and is looking for a new role as they have been advised by current employer that they will be unable to continue their employment due to recent redundancies. Used to maintaining a range of electrical equipment such as motors, drives, sensors and cranes and is used to working with a PPM system (SAP). Excellent opportunity for a manufacturing organisation to take on a fresh technician level candidate who they would still be able to mould in to their systems and procedures easily…REQUEST MORE INFORMATION


SRMS48939 – Electrical Maintenance Technician – £28K+

Time served electrical maintenance technician with 13 years’ of relevant experience currently looking for a role on days, 2 shift or 3 shift pattern. Holds an ONC in electrical engineering, NVQ Level 3 in electrical engineering and 17th edition wiring regulations. Experience gained mainly within heavy industrial environments but is happy to consider other manufacturing sectors for their next position. PLC fault finding and basic modification experience with Allen Bradley, Gem 80 and Siemens systems and also has some SCADA experience utilising it for day to day fault finding with previous employer. Used to working with a computerised PPM experience using a SAP system. An excellent option for clients looking to add maintenance expertise to their team… REQUEST MORE INFORMATION


 

SRCH41368 – Production Team Leader – £33k+

Vastly experienced production team leader in the steel and recycling industry available to start work immediately. Used to working within a KPI driven environment and has supervised and line managed up to 42 staff on site coordinating and progressing training plans for operatives. Responsibilities in previous role included compile daily production reports, control of employee additional work hours and agency temporary work force to meet production targets. IOSH managing safely qualified and very health & safety focused. Proficient in the use of Microsoft office applications including Word, Outlook and Power Point and use of the SAP system & KMI… REQUEST MORE INFO


SRMS24505 –  R&D Technician – £25K+

Degree qualified scientist with 7 and half years of experience gained within industry. Holds a BSc in forensic science and has worked in both product development and quality assurance environments. Most recent role involved developing products to meet customers’ criteria within the printing industry dealing with polymers, solvents and dyes. Used to undertaking hands on testing as part of a role and has is familiar with techniques such as GC, HPLC, TLC and FTIR. Available for an immediate start due to a recent redundancy (site closure) and is keen to find a role based within a product development / research & development environment….REQUEST MORE INFO


 

SRMS20451 – Quality Engineer  – £35K+

Quality professional with 33 years’ experience having worked in automotive and oil & gas sectors. Originally time served as an apprentice electrician holding a BTEC in electrical and electronic engineering but career has been focused within quality for the last 15 years. Certified Six Sigma Green Belt and has undertaken training in areas such as SPC, 8D, process mapping and ISO14001 auditing. NPI and project quality based experience and used to having contact with both suppliers and customers regarding quality issues. Achievement wise has been involved in the introduction of both visual management systems and product inspection checklists with a previous employer….REQUEST MORE INFO


 

SRMS48533 – Multi-Skilled Maintenance Technician – £28K+

Maintenance professional with around 20 years of experience in manufacturing working within the food, FMCG, plastics and electronics sectors. Time served holding a diploma in mechanical / electrical engineering along with a HNC in mechatronics. Familiar with working with a wide range of equipment such as pneumatics, hydraulics and injection moulding and blow moulding machines. Used to working within continuous improvement driven environments utilising tools such as TPM with a focus on reducing scrap where possible and keeping downtime to a minimum. Looking for a role on either 2 shift or 3 shift pattern with salary expectation being based on location and shift pattern… REQUEST MORE INFOR

SRDK23241 – Quality Engineer  £32K+

Experienced quality professional with a HND in mechanical engineering & experience gained within the automotive sector. Fully proficient in modern manufacturing techniques such as 8D, 5Why’s & Ishsikowa. A very methodical individual with experience of implementing both an ISO 9001 and TS16949 quality management system as well as leading external customer audits at some of the world’s largest automotive OEM’s. The Candidate possesses good working knowledge of automotive industry methodology, APQP, PPAP, FMEA & has knowledge and experience of plastic injection moulding processes… REQUEST MORE INFO


 

SRDK34042 – Senior Manufacturing / Process Engineer – £40K+Driven manufacturing / process engineer with a HND in computer aided engineering who was also originally a time served electrical maintenance technician. Varied manufacturing experience including the automotive & electronic sectors. The candidate has knowledge of DFMEA, PFMEA, MSA, PPAP, APQP, & SPC. Currently holds the position of manufacturing engineering manager and is responsible for a team of 6 with full responsibility for all new product introduction. Knowledge and experience of using various quality / lean & continuous improvement techniques and tools such as Kaizen, 5s, SMED, Poke Yoke, 8D Reporting and is a Six Sigma Green Belt…REQUEST MORE INFO


SRDK19048Process / Programme Manager  – £45K+Experienced automotive process / programme manager with a diploma in manufacturing management & technology. Fully conversant with APQP, PFMEA, and other techniques widely used within the automotive sector. Has lead extensive projects within the automotive sector working with the likes of Ford, Toyota & Jaguar Landrover. A proven individual who can boast 100% delivery on time record to date serving the majority of automotive OEM’s and engine builders in their career to date….REQUEST MORE


 

SRMS47833 – Manufacturing Engineer – £32K+

Professional and Continuous Improvement focused Engineer currently looking for a role within South Wales due to upcoming relocation to Merthyr Tydfil from the Midlands. 9 years’ experience within manufacturing 5 years’ of which having been within the automotive sector. Time served holding a BTEC in Manufacturing Engineering and currently completing and self-financing Six Sigma Green Belt training in their own time. NPI experience and familiar with processes such as PFMEA, APQP and PPAP. Lean and CI experience with tools such as 5S, Kaizen and TPM and is a qualified Internal Auditor for TS16949. An excellent addition to any manufacturing environment and would be happy to take up a position within either automotive or medical device industries.

REQUEST MORE INFO  


SRMS32762 – Quality Engineer – £32K+

Time served Quality Engineer with 7 years’ experience within quality focused roles in the Automotive sector. Holds a HNC in Mechanical Engineering and is currently working within a NPI focused position bringing products in to production. Familiar with processes such as SPC, PPAP and APQP and has worked with a wide range of customers including Honda, BMW and JLR. Knowledge of a number of Lean Manufacturing/Continuous Improvement tools such as Kaizen, Poke Yoke and Kanban amongst others. Experience of managing suppliers and also being customer facing spending time onsite with customers as and when required. Keen to find a new challenge and role to further progress themselves and develop their skills further.

REQUEST MORE INFO  


SRMS36951 – Design Engineer – £25K+

Degree qualified CAD/Design Engineer with around 4 years’ of industry experience. Candidate holds a degree in Mechanical Engineering (2:1) and has CAD experience with SolidWorks and SolidEDGE. Experienced in designing and working with sheet metal, fabricated steelwork, brazed parts, plastics and mouldings. Used to undertaking tasks such as compiling CAD drawings, analysing cost effective solutions to meet customer requirements, creation of Bills of Materials (BOMs) and controlling design changes as required. NPI experience taking products from concept through to prototype and on in to production. Fully proficient in all Microsoft Office applications and has used systems such as SAP and SAGE also.

REQUEST MORE INFO  


SRMS47746 – Product Design Engineer – £27K+

Degree qualified design professional with around 3 and a half years of industry experience gained since completing their studies. Holds a BSc in Industrial Design (2:1) and their recent experience has been gained within an organisation providing initial design, development and prototyping services to a wide range of clients for analysis and product development purposes. 3D and 2D CAD skills with SolidWorks and AutoCAD and is also competent in the use of 3D printing, scanning and rendering. Previous experience gained within a manufacturing environment taking customer request from concept through in to production, creating Bills of Materials (BOMs) and updating existing drawings in line with engineering change requests.

REQUEST MORE INFO  


SRCH8850 – Engineering Manager – £47K+

Highly experience Engineering Manager who responsibilities at present include developing the engineering and maintenance departments. Possesses a good working knowledge of Microsoft Office, and Microsoft Project and is proficient in various 2D and 3D CAD packages, including Auto CAD and CATIA. Is effectively able to lead. developing and motivating engineering maintenance team’s in order to build a multi skilled, competent and flexible workforce. Career achievements include formulating and introducing a PPM (preventative planned maintenance) system for all plant and equipment, ensuring maximum plant availability for production. Holds IOSH Managing Safely qualification.

REQUEST MORE INFO  


SRCM16136 – Maintenance Engineer (Elec Bias) – £36K

With around 32 years of experience, time served with an ONC in Instrumentation and Control. They have great experience of fault finding and programming with Allen Bradley and a little with Gem80 and Mitsubishi. Also has recently started programming a little bit with SCADA. Candidate has worked with MBZ, SAP and a little Maximo computerised maintenance systems.

REQUEST MORE INFO  


SRCM12447 – Multi skilled Maintenance Technician – £30k

A focused individual who is looking to enhance their skills in a forward thinking organisation who has a HNC in Engineering, Advanced Manufacturing. Was time served in the steel industry however has also had experience in sectors such as food (8 years), high technology (5 years), automotive (11 years) and plastics( 2 years).

REQUEST MORE INFO  


SRCM37188 – Mechanical Engineer – £32K

Highly motivated candidate looking for the next step up in their career who holds a degree in mechanical and manufacturing and is time served.  Has been working in plastic sector of manufacturing from the last 10 years and for the last three years they have been working a supervisor’s role due to ex supervisor leaving. Experience with lean manufacturing and excellent skills in hydraulics and pneumatics.

REQUEST MORE INFO  


SRCM31654 – Test Engineer – £29K

With 33 years relevant experience and Higher TEC in telecommunications (equivalent to HNC) the candidate is currently looking for a new position due to redundancy. Has had experience in the broadcasting and high technology manufacturing industries. The candidate has used engineering software such as Math CAD, NEC WIN, IMetrix and Ansoft Designer SV. They also hold city and guilds Inspection and Testing of Electrical Equipment- PAT.

REQUEST MORE INFO  


SRMS42913 – Mechanical Design Engineer – £27K+

Mechanical design professional with just over 2 years of post-graduate experience since completing studies in addition to undertaking a placement year as part of studies. Masters qualified holding a MEng in Mechanical Engineering (2:1) and is keen to now move on from current role to expand their knowledge and experience a role which would allow them more all-round involvement in the design and development process.

REQUEST MORE INFO  


SRMS46671 – Design Engineer – £25K+

Design professional whose current role involves the design and development of equipment utilised within a high technology sector keen to move on to find a new role and expand their skills further. 2 years’ experience gained since graduating with a BEng in Mechanical Engineering (2:1). 3D CAD experience with SolidEDGE and is used to using additional programmes for BOMs creation and FEA purposes.

REQUEST MORE INFO  


34241 – Mechanical Design Engineer – £40K+

Experienced design professional with around 25 years of relevant experience working mainly within the automotive and plastics industries. Holds MSc in industrial design along with a HND in 3D product design and has experience of CAD packages including SolidWorks, CATIA V5 and ProEngineer. Experienced in undertaking full product life cycles and designing for high volume manufacturing they are used to working with injection moulded parts, metal pressings and castings. The candidate has most recently been working away from South Wales on a contract basis and would also consider suitable contract roles within South Wales and they are keen to find a role in the South Wales vicinity due to a change in their personal circumstances.

REQUEST MORE INFO  


46415 – Multi-skilled Mechanical Maintenance Technician – £30K+

Time served maintenance technician originally qualified as a fitter / turner and gaining qualifications such as a BTEC in hydraulics and pneumatics along with City & Guilds qualifications in mechanical production competences and basic engineering competences. Used to carrying out maintenance on equipment such as gearboxes, drives, fans, pumps, conveyors and undertaking of laser alignment of couplings, pulleys and belt drives. Familiar with working within fairly heavy and industrious environments. Training undertaken in areas such as lifting and slinging, working at height and confined space. Candidate has also undertaken a two week course in basic electrical skills to improve their multi-skill ability on the electrical side of things.

REQUEST MORE INFO  


43922 – Maintenance / Facilities Manager – £36K

With 23 years’ experience a HND in electronics and electrical engineering and currently studying for a masters in facilities management. Experience using PLCs such as Allen Bradley, Gem80, Mitsubishi and Siemens. With programming knowledge on Allen Bradley, also has knowledge with SCADA and HMIs. Supervisory experience of large and small teams ranging between 15- 30 people.  7 years’ experience in a heavy industry.

REQUEST MORE INFO  


46383 – Electrical Technician – £31K

7 years’ heavy industry experience, time served with a HND in electrical and electronics engineering. Has had experience with PLCs including Allen Bradley and Gem 80, also experience using SAP CMMS. Some of the duties in their current role are commissioning tasks on new installations/equipment and after plant shut downs and breakdowns, assisting in project work and plant upgrades, using engineering drawings/schematics to carry out tasks and fault finding, using multi-meters, insulations resistance testers and clamp meters.

REQUEST MORE INFO 


14603 – Multi Skilled Maintenance Technician –  £26k+  

9 Years in the manufacturing industry, time served with a HNC in building services and NVQ level 1 and 2 in electrical installations. 17th edition qualified, experience with SCADA and HVAC. Works with AC and DC drives regularly and fault finding on electrical, mechanical, and pneumatic systems. In previous roles they were responsible for the electrical and mechanical breakdowns and maintenance of production machinery. Also to assist with tool changes and setup of machinery during product changeovers.

REQUEST MORE INFO  


46370 – Project Engineer – £30K+ 

A highly efficient, hardworking and talented project engineer, qualified to BA (hons) in Electrical & Electronic Engineering with an excellent understanding of project management and design processes within an automotive manufacturing environment. Able to ensure timely, safe and cost effective design solutions throughout the complete product lifecycle and has over seven years CAD experience. Experienced in all the design stages of a product, including research, development, prototype design and manufacture through to final production. Currently looking to advance career with a forward thinking and vibrant company and is looking for a future role as a project engineer or project manager”

REQUEST MORE INFO  


43922 – Facilities Engineer / Manager – £35K                

23 years in the manufacturing industry, HND qualified in electrical and electronic engineering and currently studying for a masters in facilities management, looking for a facilities management to take advantage of his MSC. Experience includes management of contractors, responsibility for health and safety and management of the facilities maintenance budget. Also has experience with fixed installation testing, PAT testing, HVAC, PLC’s / HMI’s (Allen Bradley / SCADA), AC/DC servo drive systems, fibre optic drive control systems and software programming. Candidate is available for an immediate start.

REQUEST MORE INFO  


28781 – Electrical Technician – £34K

20 years experience within the food industry, time served with a BTECH national certificate in electrical and electronics engineering. Has had experience with numerous or PLC’s and HMIs including Allen Bradley, Control Logix, Siemens S5, Gem80, Alspa 80 – 35, RSView 32, Imagem, Redlion, Omron and Hitachi. 17th edition qualified with experience using a SAP CMMS system. Current position involves them running the day to day engineering team, which consists of 7 technicians maintaining and improving the process to its optimum performance for machine efficiency and working closely with production management.

REQUEST MORE INFO  


29102 – Project/Design Engineer – £35K

Masters qualified in the field of mechanical engineering having gained around 4 years of relevant work experience since graduating. Current role involves management of projects from cradle to grave working across all functions, designing of solutions in line with customers’ needs, creating BOMs (Bills of Materials) and liaising with customer regularly to ensure the successful completion of projects to the required timescales. 3D CAD experience with Solid Edge and SolidWorks and also able to utilise tools such as Ansys for FEA purposes. Experience of working with large global blue chip customers and is keen to move on to progress themselves further and improve their skills further within a new challenge.

REQUEST MORE INFO  


14935 – Quality Coordinator/Technician – £25K

Quality professional with around 6 years’ experience within a quality based position in the medical device/healthcare sector and 14 years’ experience within this sector overall. Currently involved in auditing product lines in accordance with ISO9001 standards, ensuring GMP processes are being adhered to, validation of manufacturing processes and logging of customer complaints prior to undertaking investigation of those concerns or issues. Used to utilising problem solving tools such as 8D and root cause analysis and has also ensured 5S was adhered to in previous position as a team leader. Keen to move on utilise their skills within a new organisation in order to develop further and improve quality systems via their existing skills.

REQUEST MORE INFO  


25577 – Project/Design Engineer – £33K+

Degree qualified holding a BSc in Computer Aided Engineering and having gained around 14 years’ experience within design and project based positions. Experienced in the use of Autodesk Inventor, Solid Edge, Radan, Ideas and Mold Flow. Familiar with working with materials from a design perspective such as sheet metal, injection moulded plastics, vacuum formed components and precision engineered components. Currently involved in working from concept with the customer through to completion and has a good amount of leadership experience as a project lead throughout their career. Candidate would make an excellent addition to any design team and is keen to find the right position for them to take the next step in their career to develop further.

REQUEST MORE INFO  


44075 – Production Engineer – £27K+

Engineering professional whose current remit involves overseeing around 20 staff within the manufacturing area. Degree qualified holding a BEng in Materials Science and Engineering and currently working within a highly regulated manufacturing environment. Current role involves design and development of new systems for the introduction of new products, improvement of existing processes, improving quality and efficiency and writing of technical reports. Oversees processes such as NDT, heat treatment and etch inspection as well as overseeing technical queries. Good understanding of Six Sigma and Lean Manufacturing gained with current employer. Keen to find a role based within South Wales as is currently working in the West of England.

REQUEST MORE INFO  


46030 – Electrical Maintenance Engineer – £30K+

Degree qualified maintenance engineer currently undertaking a ‘hands off’ role who is keen to move back into a more ‘hands on’ position within manufacturing. Degree qualified holding a BSc in Mechatronics after originally completing an electrical apprenticeship. Has also undertaken and is due to complete a masters level qualification. Familiar with fault finding (some programming) with Siemens PLC systems and also has PROFIBUS experience. Installation experience and familiar with project based work within the maintenance field. Familiar with working within industrious environments but is happy and comfortable considering other manufacturing environments to broaden their skills and understanding.

REQUEST MORE INFO  


21262 – Electrical Engineer – £35K

Degree qualified in electrical engineering, in addition to a full apprenticeship and 10 years experience in industry. Good knowledge of PLC systems including Siemens S5 / S7, Mitsubishi and Omron. Recently undertaken a SCADA course and is looking to advance knowledge in this area. Familiar with CMMS systems currently working with SAP. Current position includes responsibility for issuing permits to work and contractor management. In the process of completely an IOSH health & safety course.

REQUEST MORE INFO  


45838 – Project Engineer – £30K

Full electrical apprenticeship and 25 years industrial experience, within the food manufacturing sector. Worked as part of project teams that have delivered completed factories and manufacturing lines of up to 80 million pounds in value. Good people management skills used to leading teams of up to 32 staff and contractors. Current role involves acting as a project engineer across four large UK based manufacturing sites. Recent achievements include, setting up a CMMS system from scratch, development and installation of a new production line which was voted best in class by the customer (a leading supermarket). IOSH managing safely.

REQUEST MORE INFO  


43196 – Production Manager – £35K

Driven management professional with varied experience and varied industry experience including automotive and the recycling industry. Has a proven track record of procedural and process development in order to improve efficiency with examples including:- an increase in site efficiency of 35% by a restructure of personnel, the introduction of a new process for model changeover reducing lost time by 50%, implementing a health and safety system in order to comply to new HSE regulations, managed the move to a larger premises recruiting additional staff and implementing rotating shifts on new processes.

REQUEST MORE INFO  


45711 – Production Manager – £35K

Versatile and experienced production manager with several years’ experience of full factory management in a £30 million per annum site. His achievements include a 20% increase in efficiency achieved through implementing new line balancing techniques working to customer demand with hourly target boards to monitor and improve output performance, a 38% improvement in delivery performance, and obtaining accreditation to ISO14001 environmental certification on-site through effective procedural changes. The candidate also holds a green belt six sigma qualification and holds experience in the plastic injection moulding and electronic sectors.

REQUEST MORE INFO  


45893 – Engineering Team Leader/Supervisor – £30K+

Mechanically biased multi-skilled engineering supervisor with 15 years’ experience within the FMCG sector. Holds a HNC in mechatronic engineering along with an ONC in mechanical engineering. Experience of managing a team of 18 multi-skilled engineers with responsibility for reactive maintenance, management of planned preventative maintenance and performance improvement. Experience of budget management and familiar with lean manufacturing tools such as 5S and TPM. Training undertaken in areas such as ILM foundation management, PRINCE2 foundation and practitioner, IOSH managing safely and Siemens S7 PLC.

REQUEST MORE INFO  


39327 – Maintenance & Engineering Manager – £40K+

Senior Engineering professional with 35 years’ experience working predominantly for large blue chip organisations. Currently gaining experience at plant manager level (120+ staff) working away from South Wales but is keen to return to a more local role at senior management level. Time served holding a HNC in electrical engineering has worked most recently within a heavy industrious environment leading a team of 11 multi-skilled staff. Experienced in project management, continuous improvement and PLC development. Also has knowledge of SCADA systems. Candidate would make an excellent addition at senior management level to a wide array of environments within South Wales.

REQUEST MORE INFO  


30350 – Field Service Engineer – £25K+

Field service engineer with an NVQ level 2 in electrical and electronic engineering and experience gained in the servicing and repair of several types of electronic equipment. Experience includes machine installation, equipment repair and servicing, alarm servicing and repair, pc repair, hard drive cloning

REQUEST MORE INFO


38773 -Test Technician – £25K+
Engineering test technician with experience gained within the automotive and medical device sector. Experience includes HVAC performance tests, producing written technical reports for completed tests, manufacturing jigs and fixtures for one-off testing, assisting the engineering team in the maintenance and calibration of test rigs, and the production of standard operating sheets in order to build a robust an accurate testing process. Candidate has a wealth of testing experience and would be an asset to any potential employer.

REQUEST MORE INFO


44407 – Electrical Maintenance Engineer – £33K+

HND qualified with 16 years’ experience in a variety of environments such as food and automotive. Time served having completed an ONC in electrical / electronic engineering before moving on to complete a HNC in mechatronics and a HND in engineering with a focus on network technologies and digital logic. Excellent PLC fault finding ability having worked mainly with Allen Bradley (also programming and modification ability) but also having gained experience with Siemens and Mitsubishi. Computerised PPM maintenance experience (currently using SAP). Familiar with maintaining a wide range of equipment including automated equipment, presses and conveyors.

REQUEST MORE INFO  


36395 – Health & Safety Coordinator/Manager – £25K+

Health & safety professional with around 10 years’ experience within the manufacturing sector. Holds NEBOSH general certificate and has attended numerous relevant training courses such as environmental awareness, near miss reporting and principles of continuous improvement deployment. Qualified ISO9001 and ISO14001 internal auditor and is also a Six Sigma Green Belt. Experienced in dealing with and understanding the risks of a range of manufacturing processes including plastic injection moulding, vacuum forming and assembly processes. Keen to find a new role due to current employer’s long term plan to move manufacturing out of the UK and would make an excellent addition to any environmental, health & safety team.

REQUEST MORE INFO  


41573 – IT Manager – £40K

Senior IT professional with a degree in technology management and experience of IT management across multiple sites. Skills include service desk management, IT project management, hardware support & installation, application support & installation, telecoms support including VoIP, IT supplier/partner liaison with full budgetary management experience for additional equipment or software purchases, currently supporting 400 users in total, with 36 Servers (6 physical and 30 virtual). A knowledgeable individual with proven problem solving skills with the ability to develop a robust and efficient IT infrastructure in any environment.

REQUEST MORE INFO  


40066 – Project Engineer – £35K

Driven project/process engineer with a HNC in mechanical engineering and experience gained in the automotive and electronic sector. Skills include managing multi-million pound project for large customers such as Honda & BMW, full responsibility for ensuring developed product meets customers needs in terms of performance durability and payout, using various modern engineering tools & techniques to ensure design quality assurance is achieved, investigate the route cause of any failures and apply counter measures, applying CI tools and techniques such as Six Sigma and holds a Six Sigma Green belt. A highly skilled individual with a wealth of experience and qualifications which include an ILM endorsed advance problem solving certificate and an IOSH health and safety certificate with a proven track record.

REQUEST MORE INFO  


44680 – Mechanical Maintenance Technician – £26K

Highly skilled mechanical maintenance with a City & Guilds in mechanical engineering and vast experience in heavy industrial environments. Skills include breakdown repair, planned maintenance, welding with tig/mig/arc and oxy acetylene burning, lathe work, milling, and maintenance and repair of pneumatic & hydraulic systems. Good knowledge of health and safety in a modern manufacturing environment and holds an IOSH certificate.

REQUEST MORE INFO  


44976 – Process Technician/Process Engineer – £24K+

Degree qualified process technician keen to find a new and challenging position where they can utilise their existing skills and develop themselves further. Has recently completed a BEng in mechanical and manufacturing engineering (2:1) having initially completed a full mechanical engineering apprenticeship. Currently responsible for the development of tooling, the design of jigs and fixtures and the upkeep and maintenance of all relevant engineering documentation. Candidate has a wide ranging knowledge of a variety of different types of equipment and is fully proficient in Microsoft Office applications. CAD experience utilising AutoCAD and SolidWorks.

REQUEST MORE INFO  


31887 – Project/Programme Coordinator – £20K+

Professional and organised project / programme coordinator keen to find a new challenge. 6 years of experience gained in relevant positions working within the recycling and electronics sectors. Very good customer focus and is familiar with being the first point of contact along with processing and tracking customer orders. MRP experience and fully proficient in all Microsoft Office products including using some of the more advanced functions of EXCEL. Excellent communication skills and would be a worthwhile addition to any manufacturing organisation in an administrative or customer service based role.

REQUEST MORE INFO  


45109 – Quality & Manufacturing Engineer – £33K

Proactive and methodical quality and manufacturing engineer with a BEng in mechanical and manufacturing engineering and experienced gained in a process based manufacturing environment. Skills include conducting internal & external ISO 9001 audits to ensure conformance, conducting daily problem analysis to resolve any process related issues and ensure production capacity is maximised using tools such as 5 why/fishbone diagrams/input-output matrixes/ and DFMEA & PFMEA. The candidate has also participated and led various Kaizen events in order to analyse and improve processes and has played a key role in implementing total preventive maintenance within their current organisation. Able to work independently or as part of a team to complete tasks with an extensive understanding of various KPI’s and a proven ability to lead and develop projects in order to achieve continuous improvement. 

REQUEST MORE INFO  


21879 – Design Technician – £27K

Experienced and highly professional design technician with and NVQ level 2 in manufacturing & business improvement techniques with experience gained in the design of special purpose machinery and a range of metal based products. Skills include 2D & 3D CAD mainly with Autodesk Inventor, project engineering, sheet metal engineering, CNC programming, job costing and quoting, creating BOM’s, prototyping, and production planning. The candidate also possesses a good working knowledge of Microsoft Word, Excel and Outlook.

REQUEST MORE INFO 


44183 – Electrical Maintenance Technician – £33K

Ambitious electrical maintenance professional with a HNC in electrical and electronic engineering and experience gained within a heavy industrial environment. Skills include fault finding on a wide range of equipment including PLC’s AC/DC drives, issuing work permits, functional testing of equipment, emergency response on equipment breakdown, and updating SAP system when work is completed. Currently seeking a new challenge and possessing a broad range of maintenance experience within a manufacturing environment.

REQUEST MORE INFO 


45194 – Manufacturing/Production Manager – £32K+

Experienced manufacturing professional with 25 years’ experience mainly within the plastics sector. Keen to find a new challenge due to a pending site closure and would be happy to consider new industries also. Experienced in dealing with areas such as production, quality and health & safety and currently has overall responsibility for the manufacturing process on site. Achievements include creating an immediate 8% increase in yield through the introduction of a change and also made a change with a previous employer which led to full production being able to start 90 minutes earlier on certain equipment. Holds an IOSH Managing Safely along with a range of internal auditing qualifications as well as being proficient in the use of all Microsoft Office applications

REQUEST MORE INFO 


44936 – Lead Maintenance Technician – £30K+

Highly motivated maintenance professional with in-depth knowledge of mechanical and operational engineering who holds an ONC in engineering and a HNC in mechanical plant engineering. Wide range of industry experience including steel manufacture, automotive manufacturing and the power generation sector. Key skills include leadership experience having supervised teams of technicians throughout their career, planning and scheduling maintenance tasks, commissioning plant and operation systems, creating work order cards any safety documentation and work instructions, and a good knowledge of health & safety having a completed a NEBOSH foundation course. The candidate is also a power station qualified authorised person AP (1-4).     

REQUEST MORE INFO 


32239 – Project Engineer – £30K+

Degree qualified project engineer keen to find a new and challenging role that would allow them to continue to develop their skills and gain further experience. Candidate holds a BEng in mechanical & manufacturing engineering having originally completed a mechanical engineering apprenticeship. Current role is involved in managing multiple projects inclusive of all PPAP submissions and liaising with customers daily on the progress of their projects. Also currently involved in a large scale product transfer to a different site. Possesses 3D and 2D CAD ability and is also an internal auditor for TS16949. Very ambitious and would make an excellent addition to any manufacturing project team

REQUEST MORE INFO 


44991 – Electrical Maintenance Technician – £27K+

Electrically biased maintenance technician with around 16 years of experience gained predominantly within heavy duty, industrial manufacturing environments. Time served holding a HNC in electrical/electronic engineering along with a NVQ level 3 in technical services and also 17th edition wiring regulations. Used to undertaking both reactive maintenance and planned preventative maintenance along with undertaking project management and supervisory roles as part of capital project teams. Familiar with working with PLC systems such as Siemens S7, Allen Bradley and Mitsubushi and also has experience of creating PPM schedules, creating risk assessments, delivering tool box talks, undertaking staff appraisals and recording test data for analysis purposes.

REQUEST MORE INFO 


44748 – Production Engineer – £33K+

Experienced automotive production engineer available for an immediate start due to a recent redundancy. Originally time served as a toolmaker gaining an ONC in mechanical engineering they have gone on to complete a BSc in mechanical and manufacturing engineering. Experienced with customers such as Honda, Nissan, Renault, JLR and Volkswagen along with utilising processes such as FMEA. Familiar with lean/CI tools such as kaizen, value stream mapping and poke yoke. Good experience of dealing with new product introduction and has delivered projects with budgets of up to £3.5 million and is keen to continue their career and put their experience to use for a new employer. 

REQUEST MORE INFO 


44840 Electrical Maintenance Technician – 28K+

Experienced electrical maintenance technician available for an immediate start due to accepting voluntary redundancy from previous employer. Time served holding an indentured apprenticeship and has spent around 35 years with previous employer within the automotive sector. Excellent fault finding experience with PLC systems including Allen Bradley and Siemens S5 and S7 along with a range of ABB Robots and CNC Machinery. Supervisory experience at various points throughout career and has attended a wide variety of training courses including mechanical maintenance for electrically bias maintenance staff.

REQUEST MORE INFO 


35345 – Project Engineer – £27K+

Degree qualified project engineer who has gained around 3 years of experience since graduating with a BEng in Mechanical Engineering with project and product focused roles. Currently undertaking a Masters in Lean and Agile Manufacturing and keen to move on to find a new challenge and develop their skills further. Experience gained to date within a highly regulated sector where their role involves the development of projects involving manufacturing processes such as fabrication and welding. Familiar with supervising staff as part of project teams and has experience in managing multiple projects at any one time. Would make an excellent addition to any manufacturing organisation.

REQUEST MORE INFO  


44748 – Project/Production Engineer – £34K

Highly motivated project/production engineer with a BSc in Mechanical and Manufacturing Engineering with vast experience gained within the automotive sector. Achievements include 10% cost reduction on estimated costs and facilities on new projects, leading value stream mapping and kaizen activities improving line efficiency from 64% to 87%, and changing the design and manufacturing method of a range of products leading to an annual cost saving of £840K. A confident and knowledgeable individual with a proven track record seeking a new challenge to further their career. 

REQUEST MORE INFO  


22361 – Engineering/Maintenance Manager – £35K

Multi-skilled maintenance professional with an electrical bias holding a HND in multi-skilled engineering and vast experience gained within the FMCG sector.  Skills and experience include creating and monitoring of a PPM schedule, instigating and managing various engineering based projects to improve equipment and minimise downtime, maintenance of site services including steam boiler compressors and chillers, recruitment and training all staff ensuring department met all regulatory and safety standards, and implementing a 5S program. Strong leader with a proven ability to deliver the highest standards of engineering and maintenance  

REQUEST MORE INFO  


44810 – Maintenance Manager/Project Manager – £40K+

Degree qualified professional engineer holding a BEng in Integrated Manufacturing and currently finishing a Masters in Professional Engineering ahead of applying for chartered engineering status. Originally time served holding a HNC in Mechatronics and they have gained around 14 years’ experience on the maintenance side of things before moving in to a project management focused role overseeing large scale CAPEX projects. Previous experience of supervising a maintenance team of 12 and has implemented a PPM and TPM system. Keen to find a new challenge either in maintenance / engineering management or project management to develop their career further.

REQUEST MORE INFO  


44678 – Mechanical Maintenance Technician – £27K+

Time served experienced maintenance professional with experience gained within the FMCG and packaging sectors. Holds City & Guilds Mechanical Engineering qualifications along with a NVQ qualification in Machining (Lathes and Milling) and has gone on to undertake training in areas such as IOSH, MIG welding, COSHH awareness, 5S, autonomous maintenance and basic electrical maintenance. Familiar with working with a computerised PPM system and available for an immediate start due to an impending redundancy. Good involvement in continuous improvement assisting to create an improvement in OEE from 23% up to 68%.

REQUEST MORE INFO  


44661 – Mechanical Maintenance Fitter – £27K

Experienced mechanical maintenance professional with experience of working within heavy industrial sectors and a City and Guilds in Engineering. Experience include the maintenance and repair of rotating equipment, pneumatic and hydraulic devices, overhead cranes, milling machines, conveyor systems and assorted elevating machinery. Highly competent and seeking a new challenge within the manufacturing sector.

REQUEST MORE INFO  


16047 – Production Shift Leader – £33K

Experienced shift leader with strong continuous improvement and lean manufacturing experience. Experience of managing teams of up to 60 staff with achievements including improving health and safety records, increasing productivity by 10% yearly through the implementation of 5S/Six Sigma and Kaizen techniques, EFESO continuous improvement facilitator on-site driving and leading teams to a focus on minimising downtime through total preventive maintenance and increasing productivity. A true management professional with a passion for driving change and investing in people.

REQUEST MORE INFO  


43973 – Mechanical Maintenance Technician – £27K+

Multi-skilled mechanical maintenance technician with around 35 years of relevant experience within a variety of sectors including automotive, aerospace and more recently food manufacturing. Time served holding city & guilds mechanical engineering qualifications. Able to undertake basic electrical maintenance tasks such as electrical fault finding and some electrical installation work. Used to maintaining a wide range of pneumatic and hydraulic equipment and has maintained equipment such as wrappers, conveyors, boxing machines and ovens. Keen to secure a new role and challenge due to an impending site closure.

REQUEST MORE INFO  


17259 – Production Supervisor – £27K+

Professional degree qualified production supervisor with around 8 years of experience in cell based manufacturing setups. Familiar with dealing with large numbers of staff (up to 50) within current role and holds ILM Level 3 in management. Originally degree qualified in a scientific field and started career within a laboratory based environment before moving in to supervisory roles. Excellent process improvement and cost reduction focus having recently completed a large scale project in this area which has led to impressive savings for current employer. Keen to move on and find new challenges in a fresh environment in order to test their current abilities and develop their skills further.

REQUEST MORE INFO  


43933 – Mechanical Engineer/Engineering Supervisor – £30K+

Degree qualified mechanical engineering professional with around 17 years of experience mainly within heavy, industrial, process driven environments. Most recent position involved the management and coordination of a team of maintenance staff dealing with routine and planned preventative maintenance. Holds a BEng in Mechanical Engineering and has gone on to complete a post graduate qualification in process and product development. Prior experience as a planning engineer overseeing the development of a planned maintenance strategy. Keen to find a new challenge and available for an immediate start.

REQUEST MORE INFO  


43774 – Electrical/Mechanical Maintenance Engineer – £22K

Experienced time served electrically biased maintenance professional with extensive experience gained in a fast moving manufacturing environment. Their skills and experience include 3 phase systems, AC and DC motors, good PLC knowledge both programming and fault finding (mainly with Omron PLC’s but holds some Siemens knowledge), training and mentoring staff, and carrying out a wide range of mechanical maintenance tasks on pneumatic equipment with the ability to use a lathe and milling machine.

REQUEST MORE INFO  


41356 – Health & Safety Officer/Advisor – £28K

Ambitious and driven health and safety officer/advisor with a NEBOSH general certificate in occupational safety and health and a NEBOSH certificate in environmental management. Achievements include a deduction in reported accidents/incidents to below an average of 3 per month as well gaining accreditation to both AIB and BRC standards. Fully responsible for all risk assessments and H&S training on-site and holding additional qualifications such as NEBSM certificate in supervisory management and an IPD certificate in personnel practice.

REQUEST MORE INFO   


43564 – Electrical Maintenance Technician – £27K+

Time served Electrical Maintenance Technician with experience of working in heavy industrial and heavily automated environments. Good knowledge with PLC systems being able to undertake fault finding, programming and modification with Siemens S7 and Mitsubishi along with a basic knowledge of Allen Bradley. Responsibility for the installation of all electrical equipment onsite in a previous role including PLC and Touchscreen systems. Also able to carry out mechanical maintenance tasks such as working with pneumatics, gearboxes and the changing of bearings. Keen to find a role based within South Wales due to the extensive travel that has to be undertaken with current role.

REQUEST MORE INFO  


38483 – Electrical Engineer – £32K+

Degree qualified Electrical Engineering professional with recent experience in a management level position. Has worked within heavy industrial environments and is keen to find a new challenge. Holds an Electrical & Electronic Engineering degree along with a HND in Engineering and a HNC in Electrical & Electronic Engineering from their time served apprenticeship. Has worked as an Electrical Planning Engineer and gained good experience of working with and mentoring apprentices as an allocated member of staff. Training undertaken includes COMPEX training for explosive atmospheres and 17th Edition Wiring Regulations and is also a PRINCE2 Practitioner.

REQUEST MORE INFO 


40858 – Electrical/Instrument Technician  -£30K

Experienced and highly skilled electrical and instrumentation specialist with vast experience gained across a number of different industry sectors including the Power and Chemical sectors. Time served having completed an electrically biased apprenticeship with British Channel Ship Repairs. The candidate’s skills include installation and commissioning work, planned / unplanned maintenance on both electrical & mechanical systems, various types of electrical & mechanical fitting including turbines, motors, generators, gearboxes, pumps and valves, instrument calibration and commissioning and control panel manufacture and installation. A highly skilled and professional individual with a wide range of engineering skills and experience.

REQUEST MORE INFO 


44140 – Production Engineer – £30K+

Engineering professional with around 30 years of experience within the manufacturing sector. Heavy continuous improvement focus and is used to working with staff to implement cost reduction and look to create output improvements. Holds a HNC in Mechatronics along with a HND in Electrical and Electronic Engineering and has recently completed a MSc in Lean Operations (Manufacturing). Familiar with and is used to utilising Lean and CI tools such as 5S, Value Stream Mapping and Kaizen Events. Achievement wise has helped to create a 30% cost reduction with a doubling of capacity within some cells.

REQUEST MORE INFO 


35223 – Electrical Maintenance Engineer – £32K+

Electrical Maintenance professional with around 35 years of experience mainly within heavy, process driven industrious environments such as Coal and Steel. Undertook an Electrical apprenticeship and has gone on to complete a HNC in Electrical/Electronic Engineering. Good level of PLC experience having worked with Siemens S5 and S7 as well as Allen Bradley and Mitsubishi brands. High voltage experience having been an authorised person for 11Kv switching. Training undertaken in areas such as PLC programming and fault finding, HMI programming and fault finding and SCADA and DCS Systems. Keen to find a new role due to a recent redundancy.

REQUEST MORE INFO 


32999 – Project Manager – £32K

Experienced project manager with extensive knowledge within the automotive industry holding a HNC in mechanical engineering and is currently completing a masters in lean and agile manufacturing. Experience of product design, cost reduction and process improvements within high volume manufacturing environments. Achievements include generating an average of 8% reduction in costs within several high profile projects over the last two years including specifying a new software application leading to a reduced response time to customer’s requests for quotation by 20%. A creative and proven problem solver looking to take the next step in the career with the experience and knowledge to make a positive impact to any new employer.

REQUEST MORE INFO


29873 – Production Engineer – £34K+

Engineering professional with around 30 years experience more recently focusing in the areas of Production and Manufacturing Engineering looking for an opportunity around the South West Wales area after a recent relocation. Qualified Six Sigma Green Belt and holds a HND in Mechanical Engineering. Experience gained in a variety of manufacturing sectors mainly working within Machine Shop environments. Has been involved in Capex level engineering projects and is used to utilising tools such as pFMEA, 5S, Kaizen and the creation of Standard Operating Procedures and work instructions. 

REQUEST MORE INFO


43306 – Process Engineer – £34K+

Six Sigma Black Belt who has gained around 25 years of experience within the automotive sector. Used to mentoring Six Sigma Green Belts and qualified to HNC level in Mechanical/Manufacturing Engineering. Currently responsible for leading Kaizen and Continuous Improvement teams on improvement projects and is used to running internal workshops for staff. Utilises techniques currently such as Line Balancing and some of the more advanced Six Sigma tools. Currently responsible for creating a range of reports on a continuous basis and using those to monitor and identify areas that improvement can be made. Keen to find a new challenge to look to utilise their Six Sigma tools.

REQUEST MORE INFO


41206 – Production Supervisor/Stores Supervisor – £24K+

Manufacturing professional who gained around 10 years of Stores supervisory experience before moving over to production and manufacturing based positions  in the last 5 years. Has worked within FMCG and Pharmaceutical sectors giving them good knowledge of working within highly regulated environments. Holds an ILM Level 3 Certificate in Line Management along with an IOSH Managing Safely and a NVQ Level 2 in Manufacturing and Warehousing. Achievement wise has managed a project team that led to an improved accuracy from 33% to 94% within a warehouse facility and saved over £500K managing a project reducing cost and waste on inbound materials and packaging.

REQUEST MORE INFO


43684 – Electrically Biased Multi-Skilled Technician – £28K+

Enthusiastic and highly motivated time served electrically biased multi-skilled technician with an NVQ level 3 in electrical engineering. Skills and experience include installation of new machinery, fault finding and problem solving on production equipment, fault finding on PLC & drive systems, carrying out and following a structured PPM program designed to minimise impact on production, and looking to improve the efficiency of machinery and processes. Good sound knowledge of health and safety and very conscious that all work undertaken is compliant to all relevant guidelines. Currently looking for a new position due to site closure.

REQUEST MORE INFO


41859 – Multi-Skilled Maintenance Technician – £30K

Ambitious time served electrically biased multi-skilled maintenance technician with experience gained of working within heavy industrial environments. Skills and experience include AC/DC speed control systems, PLC systems both programming and fault finding, experience of working at heights and overhead crane maintenance, experience of instrumentation and hydraulic & pneumatic systems, used to working to a high standard of health & safety in a challenging environment. Currently looking to further enhance their skills in a new and challenging environment.

REQUEST MORE INFO 


27546 – Quality Manager – £45K

Highly professional quality manager with a scientific masters degree and experience gained in both the pharmaceutical and medical device sectors. Skills and experience include being a six sigma green belt, using quality tools such as DMAIC FMEA and MSA to identify route cause and generate significant process improvements, qualified auditor to ISO9001 and ISO13485, and experience of developing a quality management system & gaining ISO9001 accreditation in past positions. A forward thinking individual with excellent problem solving skills with the knowledge and experience to make a real impact to any potential employer.

REQUEST MORE INFO


39269 – Shift Manager – £30K+

Shift manager originally time served in the field of mechanical engineering who has gained 4 years of direct supervisory experience within a well renowned organisation. Experienced in the monitoring of a variety of KPIs in order to achieve production targets and also ensure that all of the relevant quality levels are achieved. Holds NVQ level 4 in management and has attended numerous relevant training courses such as power press regulations, first aid and fire fighting, industrial control systems and applied hydraulics and pneumatics. Excellent opportunity for someone to employ someone with a technical and maintenance background who has gained experience at management level.

REQUEST MORE INFO 


34223 – Design Draughtperson – £28K

Hard working design draughtsperson with a City and Guilds level 3 award in 2D Design and over 6 years work based experience. Skills and experience include 5 years experience in Autodesk inventor for 3D design, Extensive knowledge of Autocad for 2d work, producing technical files for CE marked equipment, producing calculations to ensure designs are capable of working within set parameters, high level of experience with Microsoft Excel Microsoft Word and other Office software. A focused individual who is looking for an opportunity to enhance their skill set within a progressive organisation.

REQUEST MORE INFO 


43128 – Shift Manager – £35K

Experienced shift production manager with extensive experience working within the food manufacturing sector. Achievements include implementing practices to achieve higher standards including BRC accredited grade A, developing standard working procedures for various operators to ensure consistency of work, driving through continuous improvement programmes to minimise waste and increase productivity and consistently over achieves against KPI targets. The candidate has managed up to 100 people in past positions with full responsibility for quality, production targets, health and safety and disciplinary issues. An adaptable and technically astute individual with the ability and experience to be a real asset to any potential employer.

REQUEST MORE INFO


41816 – Quality Administrator – £27K

Experienced and focused Quality Administrator with experience gained within the Pharmaceutical and Medical Devise sectors. Experience of ISO 9001, GMP, GDP and ISO 13485 including external Supplier Auditing, Vast experience of Internal Auditing to GMP, GDP, ISO 9001 and ISO 13485 holding an ISO 9001 Lead Auditors qualification. Hardworking, punctual, well presented with a proven ability to build excellent working relationships at all levels.

REQUEST MORE INFO


41877 – Production Supervisor – £30K+

Driven Production Supervisor with over 13 years experience gained within the Food Manufacturing sector with an Engineering background holding a BTEC National Diploma in Engineering. Experience gained in managing both Production and Engineering staff managing KPI’s and Maintenance Shutdowns. Fully conversant in HACCP with full responsibility for the control and monitoring of all Quality, Health & Safety processes on site. An experienced candidate with a lot to offer who possesses the ability to become a real asset to any employer.

REQUEST MORE INFO


26702 – Improvements/Process Engineer – £32K+

Improvements Engineer who has gained experience at Quality Manager and Warehouse Manager level. Utilised as a trouble shooter for his previous organisation being moved into problematic areas to turn them around. Experienced in creating major savings and has worked alongside a renowned Lean Manufacturing Consultancy within his previous employer helping to create £900,000 worth of savings within the first 12 months. Originally time served within a Blue Chip manufacturing organisation holding a HNC in Mechanical and Manufacturing Engineering. Keen to look to gain a position at Engineer level in order to gain a grass roots level understanding of an organisation before proving themselves and progressing their career to the level they have worked at before.

REQUEST MORE INFO


17478 – Maintenance Manager – £38K+

Maintenance Manager with experience within Manufacturing Manager positions also currently working in England and keen to return to South Wales. Used to managing large value projects such as the procurement and installation of machinery as well as making cost saving achievements such as a £125,000 per month saving in the area of scrap reduction and establishing fault free and on time delivery of raw materials enabling a section to run at 85%+ efficiency. Originally time served and gaining a HNC in Electronics before moving into the field of Process Engineering the candidate has a broad background and good experience with Lean Tools such as 5S, TPM, SPC and DFMEA. REQUEST MORE INFO


42345 – Operations Manager – £38K+

Experienced Operations Manager who has come ‘through the ranks’ with current employer starting out as a Mechanical Engineering apprentice and working in the fields of Manufacturing Engineering, New Product Introduction and Engineering Management before undertaking current position. Degree qualified holding a BEng in Automation Systems and a HND in Mechanical Engineering. Achievement wise has managed a 66% increase in sales volume over a 36 month period, reduced a large amount of delivery arrears through the introduction of TPM and successfully project managed the introduction of over 300 new parts. Keen to move on from current organisation after over ten years in order to utilise their skills and abilities in a new environment and find new challenges.

REQUEST MORE INFO


17815 – CAD Design Technician – £26K

Experienced and highly ambitious CAD professional with experience gained in many sectors such as Automotive, Aerospace and Plastic Injection Moulding. Experience includes 3D and 2D CAD knowledge including SolidWorks, Inventor and AutoCAD, vast experience of working with and designing both Metal and Plastic based components and products plus experience of creating and updating BOMs and  all associated Engineering Documentation.

REQUEST MORE INFO


24070 – Quality Engineer – £32K

Highly driven Quality professional with experience across a wide range of industries including Automotive, Electronic and Plastic Manufacturing. Experience includes design and implementation of a Quality Management System gaining accreditation to both ISO 9001 and ISO 14001, systems and supplier quality audits and Six Sigma and Continuous Improvement activities holding a Six Sigma Green belt.  An excellent communicator with proven decision making and problem solving skills who would be an asset to any manufacturing organisation.

REQUEST MORE INFO


40094 – Software Controls Engineer – £28K

Professional Engineer with a niche skill-set that would be a great addition for any automated process driven manufacturing site. Candidate holds a BSc in Mechatronics and is able to undertake tasks such as the design of SCADA software, commissioning of PLCs and drive systems and the designing, writing and commissioning of software for both fully automated and semi-automated production machinery. Also skilled in areas such as the installation of instrumentation such as flow and pressure systems and has worked with brands such as Allen Bradley, Siemens and Schneider. Familiar with Lean Manufacturing tools such as 5S and Kepner Tregoe.

REQUEST MORE INFO


42092 – Quality Engineer – £30K+

Degree qualified Quality Engineer currently working on a contract basis with an Automotive Manufacturer. Keen to find a role back within the South Wales area working with either a Tier One or Tier Two Automotive parts manufacturer. Holds a BEng in Motorsport Engineering and Design and utilises 8D problem solving regularly while managing warranty returns through Tiers One, Two and Three. Used to writing and creating presentations through the use of EXCEL tools such as charts and Pivot Tables and familiar with a range of software packages including NX5, Matlab, Nastran and all Microsoft Office programs.

REQUEST MORE INFO


41981 – Electronics Design Engineer – £35K

Degree qualified Electronics Design Engineer keen to find a new challenge within the manufacturing sector in South Wales. Candidate holds a BSc in Electronics and they are also heavily involved in software development/modification with Embedded C within their current position. The candidate is fully proficient in the use of MS visual Studio, C and VB.net and they are also used to working with a range of microcontrollers. Prior experience in the design and modification of PCBs and originally time served as a Maintenance Technician. Candidate also has experience of travelling overseas to provide product support.

REQUEST MORE INFO


41642 – Mechanical Maintenance Technician – £20K

Ambitious Mechanical Maintenance professional who has recently completed their apprenticeship and are seeking a new opportunity. Experience gained within the Automotive sector with knowledge and experience of Quality Engineering, Planned Preventive and Breakdown Maintenance and writing and completing Engineering documentation on equipment throughout the plant. A committed and hard working individual with the ability to become a real asset to any potential new employer.

REQUEST MORE INFO


41673 –  Maintenance Engineer – £25K

Time served Mechanical Maintenance Technician with a recently completed apprenticeship and 5 years+ experience of working in a heavily automated manufacturing environment. Experience includes Planned Preventive Maintenance, Fault Finding on a wide range of Machinery, Continuous Improvement and Installation projects, some experience in the design and fabrication of new equipment, reporting and documenting any on-going Engineering issues. Currently in the process of being made redundant and would be available at short notice as a result.

REQUEST MORE INFO


32945 – Design Engineer – £27K

Enthusiastic and highly professional Design Engineer with a degree in Product Design and a Masters in Power & Aerospace Engineering. Experience gained within heavily regulated sectors and well developed CAD skills with knowledge and experience of SolidWorks, AutoDESK Inventor, and CATIA. The candidate also has experience of Rapid Prototyping, Stress and Strain gauge testing, construction of operator training manuals and test reports, component sourcing and selection, and firsthand experience of direct customer contact in order to advise on Project status.

REQUEST MORE INFO


41777 – Quality Manager – £45K

Quality Manager with over 18 years of experience within Tier One Automotive suppliers. Degree qualified holding a BSc in Physics and having been through an internal management training programme with their current employer. Familiar with tools such as 8D, PPAP, APQP, PFEMA and DFMEA and experienced in the maintenance of a TS16949 quality management system. Achievements include guiding their team to improve customer ppm from 350 down to 8, retaining TS16949 with zero non-conformities on 3 occasions and reducing response time to customer complaints through the use of a failure catalogue. Experienced with customers such as Volvo and Toyota and has used systems such as SAP as well as being proficient in all Microsoft Office applications. Candidate also has language skills in Spanish and German.

REQUEST MORE INFO


41818 – Electronic Test & Design Engineer – £28K

Enthusiastic and outgoing Electronics professional with a degree in Electrical and Electronic Engineering plus experience of working with a heavily regulated sector. Experience includes research design and evaluation of New Products, modifying existing designs, testing specifications and completing all required paperwork, safety testing including power supply unit, and repairing any faulty equipment.  

REQUEST MORE INFO


41794 – Multi-skilled Electrical/Instrumentation Technician – £35K+

Multi-skilled Electrical/Instrumentation Technician with 18 years experience working within FMCG. Time served within a well renowned industry leading organisation the candidate holds a HNC in Industrial Measurement and Control along with NVQ Level 3 in Engineering Maintenance. Has worked with a wide variety of equipment including Allen Bradley, ControlLogix, Siemens, Alstom and SCADA systems. Experience gained with variable speed drives such as Allen Bradley, Danfoss, Mitsubushi and Eurotherm. Candidate has worked with instrumentation types such as pressure, level, infrared and flow.

REQUEST MORE INFO


41905 – Instrumentation Technician – £30K+

Instrumentation Technician who has recently completed their apprenticeship and now looking for a new challenge. Candidate holds HNC in Instrumentation & Control along with NVQ Level 3 in Maintaining Plant and Systems. Experience with working with a wide range of equipment and instrumentation including pressure transmitters, resistive temperature devices, thermocouples, level transmitters, control valves, flow indicators and pressure switches. Has worked with a variety of instrumentation brands including Rosemount, HART, Fischer, Allen Bradley, Mitsubishi, Masonlean, Samsung, Klinger and Honeywell.

REQUEST MORE INFO


33222 – Mechanical Engineer – £38K

Driven Mechanical Engineering professional with a degree in Mechanical Engineering and 9 years experience gained working within a heavy industrial environment. Skills include Maintenance of Production and Planned equipment including implementing Planned and Total Preventive Maintenance techniques, Project and installation work including project managing large projects worth near £1M. Currently responsible for a team of 7-10 Engineering staff on a daily basis as well as any contractors during shut downs or installation projects whilst also being a SAP unit trainer for Plant Maintenance and Materials Management. Used to working within pressurised environments and well versed in modern manufacturing/CI techniques such as 5S and Route Cause Analysis.  

REQUEST MORE INFO


36190 – Mechanical Maintenance Technician – £28K

Mechanical Maintenance Technician with 22 years of experience within a leading Tier One Automotive organisation. Time served and holding HNC in Mechanical Engineering and HNC in Production Engineering. Candidate multi-skilled with the ability to fault find with PLC systems. Equipment they have worked with includes CNC Machine Tools, Assembly & Test Lines, Process Plants, Conveyor Systems, Robots, Press Tools, Pumps, Extraction Systems and Hydraulic & Pneumatic systems. Training undertaken includes Lean Manufacturing Awareness and ILM Level 3 Qualification and the candidate is keen to move on in order to increase their experience and look to develop themselves further.

REQUEST MORE INFO


41525 – Quality Manager – £40K

Quality Manager with 13 years experience within a well respected and prestigious manufacturing organisation. Candidate is degree qualified holding a BSc in Engineering Business Development along with a Diploma in Environmental Management  and is a certified Six Sigma Green Belt. Internal Auditor for ISO14001 and ISO13485 and also a Lead Auditor for ISO 9001. Achievements include leading a programme that reduced customer complaints by 33%, involvement in the recovery of a supplier claim worth in excess of £80,000 and conducting an investigation into a customer claim that led to it being refuted at a value estimated to be upwards of £150,000. Training undertaken in areas such as SPC, Poka Yoke and Calibration.

REQUEST MORE INFO


39580 – Maintenance Engineer – £32K

Shift Maintenance Engineer with 21 years of experience overall 16 years of which having been within the UK. Holds a multi-skilled qualification from their home country which saw them qualify in areas such as fault finding, panel wiring, basic hand tools, basic electronics and applied hydraulics. Currently working on Electrical, Hydraulic, Pneumatic and Mechanical systems across the entire site working within a fairly heavy and industrious sector. Candidate has gained prior supervisory experience and has undergone training in areas such as Pneumatics, Hydraulics, Crane Maintenance, Thermoforming Machines, Incident reporting for Supervisors and First Line troubleshooting.

REQUEST MORE INFO


17576 – Production Supervisor/Manager – £30K

Experienced Production Manager with 30 years of experience within supervisory and management positions within the FMCG, Automotive and Electronics sectors. The candidate holds a National Diploma in Management and a Supervisory Management Certificate from the ILM. In addition the candidate has undergone training in areas such as TQM, Risk Assessment, TPM, ISO Auditing, IOSH and 5S Auditing. Experience includes the successful introduction and implementation of new product lines, effective application of Continuous Improvement techniques, training needs analysis. Application of quality techniques and the management of a major factory move project. Has managed teams from 35 up to 350 (through 9 direct reports) and has had disciplinary experience up to dismissal.

REQUEST MORE INFO


40562 – Electrical Maintenance Technician – £28K

Electrical Maintenance Technician with a HNC in Mechatronic Engineering and experience gained within the Heavy industrial sector. Experience includes Fault finding on Allen Bradley and ABB PLC systems, experience of working with AC/DC drives and motors, Installation Projects, Planned and Preventive Maintenance using SAP, and the ability to understand and interpret Engineering drawings. Good knowledge and experience of Health and Safety with experience of carrying out Risk Assessments.

REQUEST MORE INFO


41247 – Electronic Design Engineer – £35K

Experienced Electronics Design Engineer with over 30 years experience of managing projects and completing designs for the Automotive, Medical, Industrial and Petro Chemical sectors. Experience includes managing the product life cycle from concept stage to final production, on-site commissioning and Trouble shooting, Managing projects globally in areas such as the Middle East, Far East, Africa, America and India, plus extensive experience of presenting and giving technical demonstrations to customers. An accomplished Electronics Design professional with the ability to be a real asset to any prospective employer.

REQUEST MORE INFO


40827 – Mechanical Maintenance Technician – £28K

Candidate is an experienced Maintenance professional who has gained around 30 years of experience mainly within the Automotive Sector. They have recently taken Voluntary Redundancy from working with a Car Manufacturing Plant in England and are keen to find an opportunity based within South Wales. Candidate is time served and holds a HNC in Control Engineering along with City and Guild Qualifications in Mechanical Engineering, Hydraulic Control Systems, Pneumatic Control Systems, Robotics, PLC Systems, Gas & Arc Welding and MIG & TIG Welding. They have a very interesting and useful mix of skills and a good level of multi-skill ability making them a very good fit for any Tier One or Tier Two Automotive Parts Manufacturer in the South Wales area.

REQUEST MORE INFO


41190 – Manufacturing Manager/Programme Manager – £45K+

Candidate is an experienced Senior Manager with over 25 years of experience. They are currently involved in NPD but have previously undertaken roles in Production Management & Quality Management. Candidate is MBA qualified, holds an ONC in Mechanical Engineering, Membership of the Institute of Quality Assurance, PRINCE 2 and ISOH. Adept at managing large scale projects recently having delivered a project worth £4 Million the candidate also has experience of delivering large scale cost savings such as savings of £750,000 achieved through the training of over 150 staff in Lean Tools and Techniques.

REQUEST MORE INFO


30998 – Shift Manager – £45K

Senior Managerial professional with experience gained within the Electronics and Pharmaceutical sector. Strong Leadership skills and extensive knowledge of Continuous Improvement tools and techniques holding a 6 Sigma Green Belt. Achievements include a saving of over £200K through implementation of a CI project on suppliers in order to reduce packaging costs, Implementation of Total Preventive Maintenance and 5S which significantly reduced down time of equipment and eliminated waste, and successfully oversaw departmental re-organisation which lead to the organisation being able to provide a better service across the site.  Techniques and coursers used include Q-MATS, SPC, KAIZEN, ATS (Analytical Trouble Shooting), 5S, SMED and FMEA.

REQUEST MORE INFO


39828 –  Quality/Process Manager – £40K

Dynamic and highly experienced Chartered Engineering professional with a degree in Mechanical Engineering. Extensive experience within the Automotive sector including 3 years spent in Quality Management positions although Quality has played a part in the majority of their career. Recent experience includes working overseas overseeing the Production Transfer from South Wales and is keen now to find a role based back in the South Wales area. Achievements include the achievement of customer 0km PPM levels of under 10 and OEE of approaching 90% through the management of internal failure costs and an increasing productivity of manufacturing processes, implementing several Continuous Improvement initiatives and mentoring staff which lead to their current employers achieving world class quality standards and OEE. The Candidates current contract will be coming to an end in June meaning that they will be available immediately beyond this point.   

REQUEST MORE INFO


24884 – Maintenance Supervisor/Maintenance Engineer – £32K+

Candidate is an experienced Maintenance professional who has gained around 30 years of relevant experience within a range of industries including Automotive and Heavy Industry. Currently undertaking a role as an Engineering Coordinator and has also previously held a number of Team Leader and supervisory roles throughout their career meaning the candidate is very used to taking the lead on shift including in a technical manner. Candidate is time served holding an ONC in the Electrical field and has gone on to complete a variety of relevant training courses such as 17th Edition Wiring Regulations, PAT Testing, Inspection & Testing and Effective Man Management. Highly skilled on the PLC side of things and has very good fault finding and interrogation skills mainly with an in-house PLC systems which was very similar to Siemens S7 and has also worked with Siemens S5 and Mitsubishi systems. Candidate is also able to do basic PLC programming and has worked with Eurotherm and Control Techniques Electrical Drive Systems Has also had a vast amount of involvement in project work in former roles also.

REQUEST MORE INFO


27209 – Quality Engineer/Project Engineer – £30K+

Candidate is an experienced Quality and Project Engineer who has gained over 20 years of experience within the Automotive and Plastic Industries. They have worked with Quality Tools such as APQP, 5 WHYS, Cause and Effect, Control Charts and PPAP and are used to working with Quality Management Systems such as ISO9000 and TS16949. Candidate has worked within the New Product Introduction function and has also gained good knowledge in the area of Plastic Injection Moulding. They hold an OND in Mechanical & Production Engineering and have also gained experience of liaising and negotiating with tooling manufacturers as well as managing issues with Project Team Members. Candidate is also happy to consider short term contract appointments as well as permanent opportunities and would make a very good and experienced addition to any Quality and Project team.

REQUEST MORE INFO


17786 – Senior Quality Engineer/Quality Manager – £37K+

Candidate is a Quality professional who has gained around 11 years of experience within Quality based positions (6 years of which within Automotive) and around 35 years of experience within Manufacturing overall including time spent in Production Management level positions. They hold a NVQ Level 4 in Quality Management and has attended a vast array of relevant training courses across their career such as DMAIC Methodology, PPA Creation and Awareness, FMEA Creation and Awareness, APQP, Measurement Systems and Analysis, Global 8D, SPC, Total Quality Management, Six Sigma concept training and Kepner Tregoe. Candidate has experience of working with relevant Quality Systems such as TS16949, ISO9001 and ISO14001 and is Lead Auditor qualified in ISO9001 and OHAS18001. They are familiar with a wide range of Quality Tools and Lean Manufacturing principles such as Control Plans, 8D, Poke Yoke, FMEA, DMAIC, APQP and PPAP and their current role also sees them having heavy involvement in the design and management of Continuous Improvement projects. Candidate is looking to progress up to a Senior Quality Engineer or Quality Management position and achievement wise they have managed to improve line yield from 98.5% to 99.9% while reducing scrap by 50% with customer returns dropping from 250 per month down to 25 per month as a result of this.

REQUEST MORE INFO


10022 – Maintenance Supervisor/Maintenance Manager- £32K+

Candidate is an experienced Engineer and Supervisor who is keen to progress and find a challenging Maintenance Supervisor role within which they can further develop their skills or alternatively take the next step towards a Maintenance Manager role. Currently responsible for a small team of Maintenance Technicians and still maintaining a hands on approach they are time served holding a HNC in Mechanical and Production engineering having gone on to complete a BTEC in PLC Programming and Engineering Applications meaning that despite being Mechanically biased they are confident and able to fault find with PLC systems. Candidate has had heavy involvement in continuous improvement and project work including use of TPM, PPM, 5S and other Lean Tools to improve yield and optimise OEE as well as having involvement in installation projects for new lines. They have attended training in areas such as Six Sigma, Pneumatics, SPC, Robot Programming, PLC Fault Finding and IOSH and currently have heavy involvement within the Health & Safety side of things with their current employer.

REQUEST MORE INFO


12101 – Mechanical Design Engineer – £28K

Experienced and highly focused Mechanical Design Engineer with a background in the Semiconductor industry. Good experience in 3D CAD Packages such as PRO-Engineer, SolidEdge, and SolidWorks. Experience includes the Design of new products and Re-Design of existing products, Creation of all related assembly instructions manuals and documentation, sourcing suppliers of components and materials and working to tight budgets. A true design professional who also speaks fluent German and has the drive and enthusiasm to become a real asset to any potential employer.

REQUEST MORE INFO


39482 – Quality Engineer – £25K

Conscientious and enthusiastic Quality professional with recent experience within the Medical sector and around 30 years’ experience in total. Trained Auditor for ISO 9000, ISO 14001 and ISO 13485. Currently responsible for the Supervision of two separate teams dealing with customer complaints and ensuring adherence to EC Regulations. An accomplished individual with a proven ability to collate data and compile reports with excellent communications skills. Outstanding eye for detail with a proven track record for maintaining compliance to multi-national regulations as well as delivering excellent customer service.

REQUEST MORE INFO


17844 – Mechanical Maintenance Technician – £25K

Highly experienced time served Mechanical Maintenance professional with extensive experience gained within the Automotive sector. Experienced in a wide range of Machine Maintenance, Fault Finding, Sheet Metal working, Welding, Hydraulics, Pneumatics, Turning, Milling, Grinding and Drilling machines. The candidate also possesses some Electrical installation experience and would consider themselves although more comfortable Mechanically to be Multi-Skilled.

REQUEST MORE INFO


35026 – Quality Engineer – £30K+

Candidate is a skilled Engineer with over 30 years of experience the majority of which having been based within Quality roles and the Automotive Industry. They are degree qualified holding a BSc in Mechanical & Production Engineering and have also attended numerous relevant training courses on subjects such as FMEA and SPC. Candidate is used to using a variety of QA tools such as 8D problem solving, 5WHYs and Ishikawa and is used to working with PPAP documentation and processes. They are an all-round Quality expert who is an IS0 9001 Lead Auditor and they have gained experience of working with a vast majority of Automotive customers including Honda, Toyota, GM, Vauxhall, Opel, Saab, Peugeot, Citroën, Renault, and BMW. Candidate has previous experience as a Senior Quality Engineer and has also gained experience in supplier Quality focused roles.

REQUEST MORE INFO


26184 – Electrical Technician – £32K

Hard working and experienced Time served Electrical Maintenance professional with extensive experience gained working within heavy industrial environments such as the Steel and Coal industry. Experience includes, fault finding and programming various PLC systems such as Siemens S7, Allan Bradley, Omron, Mitsubushi and Fanuc, AC/DC electrical drive systems including Siemens and ABB drives, and setting up planned preventive Maintenance procedures. Due to his experience the candidate has also gained some supervisory experience with responsibility for up to 24 staff in past positions.

REQUEST MORE INFO


39850 – Mechanical Design Engineer – £28K

Experienced design professional with extensive experience gained within the Automotive sector. Experience of designing Components and Products using a wide variety of materials such as Metals, Plastics, and Silicone. CAD experience includes Ideas CAD 5 and AutoCAD both 2D & 3D given their experience the candidate would also be confident in their ability to pick up other packages quickly. Qualifications include an ONC in Mechanical Engineering, a HNC in Mechanical Engineering, a HND in Computer Aided Engineering and a Degree in Mechanical and Manufacturing Engineering. 

REQUEST MORE INFO


39909 – Senior Mechanical (Design) Engineer – £50K

Experienced Chartered Design Engineering professional with a Masters in Mechanical Engineering and extensive experience in leading product development teams within the Medical, Automotive and Home Electronics sectors. Key Skills include, Expert NX user, 1 Years experience of Pro-Engineer Wildfire, Static analysis and Design verification using ANSYS, FMEA Trainer and Leader experience with knowledge of developing lite processes, experience gained using Gibbs CAM plus knowledge and expertise in the programming of various Mazak machines, Vast knowledge of using varied prototyping systems including SLS, FDM, 3D Printers and Vacuum Casting. An accomplished problem solver with a good mix of skills and experience with the ability to lead Design projects and an extremely proven track record.

REQUEST MORE INFO


38692 – Production Supervisor/Maintenance Engineer – £30K

Candidate has previously held a position where they were responsible for the production and output of 2 manufacturing cells while also implementing a PPM system and dealing with reactive maintenance to solve any breakdowns or issues. They are degree qualified holding a BEng in Electronic Instrumentation systems along with holding C&G 17th Edition Wiring Regulations and Electrical PAT Testing qualifications. Candidate has worked within ISO9001 compliance and has written and maintained Health & Safety Policies and Procedures in a number of areas. They have also implemented Lean improvement projects to successfully increase production output whilst lowering overhead costs using tools such as 5 Whys, Fishbone diagrams and FMEA analysis. Achievements include, an increase in output of a furnace by 21%, and creation of a PPM system from scratch on a budget of zero. They are keen to continue to work within a more Production Supervisory/Management related position and would be a great fit for anyone looking for someone for these positions who has gained previous experience within hands on Maintenance and has a good understanding of engineering principles.

REQUEST MORE INFO


39822 – Process Development Manager/Process Engineer – £33K

Candidate is relocating to the South Wales area and is looking for a new opportunity and challenge. Within their current role they are responsible for the process development and improvement of the coating process of the product and bringing the science behind it and the engineering together. Candidate is degree qualified holding a BSc in Mechanical Engineering and has gone on to complete a City & Guilds qualifications in AutoCAD, 17th Edition Wiring Regulations, and attended training on subjects such as IOSH Managing Safely as well as being Six Sigma Black Belt trained. Their current responsibilities include the upkeep and maintenance of pilot development equipment, project engineering, project management, calibration of laboratory equipment, managing technicians and laboratory based staff. Candidate has also been involved in the design and subsequent upkeep of a Development Trial Database which has created a Lean environment where information is easily to hand and there is no need for as many paper based printouts as there was previously for them. They are also familiar with working on Lean projects from an equipment introduction stand point as they are currently rebuilding a critical piece of equipment with the intent to create greater accuracy from it which would usually tend to cost them up to £80,000 but they are on target for it to cost under £10,000. A highly skilled and multi faceted individual who has experience of travelling overseas to visit licensees’ premises to deal with any issues and of attending a variety of conferences. Due to the innovation involved in some of their recent work they have also recently been named as part of a patent for a new type of coating process.

REQUEST MORE INFO


39642 –  Multi-Skilled Maintenance Technician (Mech Bias) – £26K

Candidate is a degree qualified Maintenance professional holding a BEng in Automotive Engineering Design along with a NVQ Level 3 in Engineering Maintenance (Mechanical). They have gained around 7 years of experience within a Tier One Automotive parts supplier and are used to working with PLC controlled systems, Pneumatic & Hydraulic systems, and Mechanical & Pneumatic presses. Knowledge and experience with a range of Lean Manufacturing techniques such as 5S, SMED, FMEA, Kanban and Kaizen and have also gained experience of travelling overseas in order to install and commission new product lines. Due to possessing some Mechanical Design experience they are also proficient in the use of AutoCAD 2000 and are very computer literate in the usage of all Microsoft Office products. They have also recently undertaken a refresher course for Elevating platforms.

REQUEST MORE INFO


22642 –  Electrical Engineer/Senior Electrical Engineer –  £40K+

Candidate is a highly accomplished and qualified Electrical Engineer with over30 years of experience within a variety of Manufacturing environments. They hold a BEng in Electrical/Instrumentation Control Systems along with having completed a time served apprenticeship  & undertaken vast amounts of training courses covering PLC Systems and Electrical Drive Systems such as Siemens S5 & S7, GEM 80, Allen Bradley and Eurotherm. Their current position sees them being responsible for process improvement projects and also providing 2nd line support from a troubleshooting perspective and having held previous roles as a Senior Technical Support Engineer and an Engineering &Maintenance Manager they are capable of leading a team as well as taking a hands on approach. They have also been involved in numerous design, programming, commissioning & installation projects around PLC and Electrical drive systems and possess an in depth knowledge on the instrumentation side of things. Due to their extensive Engineering and Maintenance knowledge plus the range of systems they have gained experience in the candidate would make a great addition to any Technical and Manufacturing organisation.

REQUEST MORE INFO


41981 – Electronics Design Engineer – £35K

Degree qualified Electronics Design Engineer keen to find a new challenge within the manufacturing sector in South Wales. Candidate holds a BSc in Electronics and they are also heavily involved in software development/modification with Embedded C within their current position. The candidate is fully proficient in the use of MS visual Studio, C and VB.net and they are also used to working with a range of microcontrollers. Prior experience in the design and modification of PCBs and originally time served as a Maintenance Technician. Candidate also has experience of travelling overseas to provide product support.

REQUEST MORE INFO


42092 – Quality Engineer – £30K+

Degree qualified Quality Engineer currently working on a contract basis with an automotive manufacturer. Keen to find a role back within the South Wales area working with either a Tier One or Tier Two Automotive parts manufacturer. The candidate holds a BEng in Motorsport Engineering and Design and utilises 8D problem solving regularly while managing warranty returns through Tiers One, Two and Three. Used to writing and creating presentations through the use of EXCEL tools such as charts and Pivot Tables and familiar with a range of software packages including NX5, Matlab, Nastran and all Microsoft Office programs.

REQUEST MORE INFO


42169 – Graduate Engineer – £21K

Driven Engineering Graduate with a BSc Hons degree in Computer Aided Design and 2 years work based experience in a Design role as part of a 2 year project. Skills and experience include 3D CAD (SolidWorks), Working with composite materials, producing Engineering reports, and project management. Good level of IT literacy with experience of using MS Word, Outlook and Powerpoint. A dynamic individual with solid work history looking to further their career within the Manufacturing sector.

REQUEST MORE INFO


24070 – Quality Engineer – £32K

Highly driven Quality professional with experience across a wide range of industries including Automotive, Electronic and Plastic Manufacturing. Experience includes design and implementation of a Quality Management System gaining accreditation to both ISO 9001 and ISO 14001, systems and supplier quality audits and Six Sigma and Continuous Improvement activities holding a Six Sigma Green belt. An excellent communicator with proven decision making and problem solving skills who would be an asset to any manufacturing organisation.

REQUEST MORE INFO


17815 – CAD Design Technician – £26K

Experienced and highly ambitious CAD professional with experience gained in many sectors such as Automotive, Aerospace and Plastic Injection Moulding. Experience includes 3D and 2D CAD knowledge including SolidWorks, Inventor and AutoCAD, vast experience of working with and designing both Metal and Plastic based components and products plus experience of creating and updating BOMs and all associated Engineering Documentation.

REQUEST MORE INFO


40611 – Design Eng/Snr Design Eng – £35K+

Candidate is an experienced design professional currently working as a Senior Design Engineer for a Tier 1 Automotive parts manufacturer. The candidate is looking for a new position due to an impending site closure and has extensive design experience using a range of materials such as Plastics, Rubber, Metals and Aluminium. The candidate has a wealth of 3D CAD experience mainly with Catia V4 and V5 and a smaller amount of experience with Ideas. They hold a BSc in Computer Aided Engineering along with a HND in Mechatronic Engineering and a number of NVQ Qualifications. The candidate has attended training courses on subjects such as DFMEA, Geometrical Dimensioning & Tolerance, Ansys and CATIA CAD packages and they are keen to look for a new challenge in order to continue to develop their skills and add to the 15 years of experience they have gained up to this point.

REQUEST MORE INFO


25107 – Electrical Maintenance Eng – £30K+

Candidate is an Engineer who has gained around 14 years of experience some of which has been within high volume output manufacturing facilities. They hold a HNC in Mechatronic Engineering as well as an ONC in Electrical and Electronic Engineering having also completed an apprenticeship. The candidate has gone on to complete a number of certified training courses on subjects such as Siemens S7, 17th Edition Wiring Regulations and City & Guilds P.A.T. They have experience of fault finding with Allen Bradley and Siemens S7 PLC systems and has also done some programming of PLCs in their current position Candidate has worked with Eurotherm Electrical Drive systems among others and is used to taking the lead when it comes to areas like continuous improvement projects especially in their current position. REQUEST MORE INFO


29376 – Programme Mgr/Snr Design Eng – £35K

Candidate is an experienced Engineer with previous experience of holding management level positions within the Programme and Project management functions of Tier 1 and Tier 2 Automotive Parts Manufacturers. They have recently finished in a role which saw them involved in the New Product Introduction for a Tier 1 Supplier working with JLR, Ford, Volvo, Nissan, Suzuki and Toyota and they have had around 15 years of experience of working within the Automotive sector all told. The candidate is also degree qualified holding a BA in Industrial Design along with a City & Guilds qualification in AutoCAD. Familiar with working with APQP and PPAP as processes and has a working knowledge of TS16949. Candidate is fully proficient in all Microsoft Office applications including Microsoft Project.

REQUEST MORE INFO


40693 – Mechanical/Project Engineer – £28K

Ambitious Mechanical Engineer with a degree in Mechanical & Offshore Engineering and experience gained within the heavy industrial sector.  Experience includes managing key projects during a large scale maintenance campaign such as Project lead and Project Mechanical Engineer on multi million pound capital equipment upgrades. Currently responsible for working on Lifting/Cranage & installation of 12.5MW AC motors with full responsibility for managing external contractors on site.  The candidate has also gained experience of designing and implementing sustainable development projects within a heavy industrial environment leading to a thorough understanding of furnace and cooling system technology. In addition to project work the candidate is also responsible for working day to day with the Maintenance teams to ensure that machines are operating correctly, safely and reliably.

REQUEST MORE INFO


35026 – Quality Engineer – £30K+

Candidate is a skilled Engineer with over 30 years of experience the majority of which having been based within Quality roles and the Automotive Industry. They are degree qualified holding a BSc in Mechanical & Production Engineering and have also attended numerous relevant training courses on subjects such as FMEA and SPC. Candidate is used to using a variety of QA tools such as 8D problem solving, 5WHYs and Ishikawa and is used to working with PPAP documentation and processes. They are an all round Quality expert who is an IS0 9001 Lead Auditor and they have gained experience of working with a vast majority of Automotive customers including Honda, Toyota, GM, Vauxhall, Opel, Saab , Peugeot, Citroën, Renault, and BMW. Candidate has previous experience as a Senior Quality Engineer and has also gained experience in supplier Quality focused roles.

REQUEST MORE INFO


14005 – Quality/Process Engineer – £35K

Candidate is an experienced Quality and Process professional who has gained around 17 years of experience most of which has been gained within the Automotive Sector although their current role is based with an organisation who service a variety of sectors. They are degree qualified holding a BEng in Materials Engineering having originally completed an OND in Mechanical/Electrical Engineering and gone one to now complete a Post Graduate Certificate in Quality. Candidate has also gone on to complete training in areas such as Project Management & APQP, Problem Solving Techniques and is also a Six Sigma Green Belt and an ISO/TS16949 Lead Auditor. They are familiar with a range of Quality Problem Solving tools such as Fishbone Diagrams and 5 WHY’s and they are responsible in their current role for chairing management meetings on Quality issues. Candidate is ideally looking to take the next step up into an official supervisory or management position but would consider opportunities at their current level if the salary and scope of the role was right for them.

REQUEST MORE INFO


40009 – Electrical Eng/Shift Electrician – £30K

Candidate is an Engineer with around 14 years of relevant experience the majority of which has been working for manufacturing organisations and their most recent role has been as a Service Engineer troubleshooting PLC issues within manufacturing organisations across the UK. They are degree qualified holding a BSc in Electrical Systems Engineering along with his HND and HNC in Engineering. Candidate has also attended numerous relevant training courses such as PLC courses on Siemens and Allen Bradley, Electrical Drives courses such as Parker and Control Techniques and HMI, Servo Drive and City & Guilds 17th Edition Wiring Regulations. Through their previous experience in manufacturing and the current position candidate has developed an in depth knowledge and a plethora of experience with PLC and Electrical Drive Systems. They have experience from a previous role of taking the lead on shift as an Electrical Engineering Coordinator where they had between 10-15 staff reporting to them. Candidate has also had experience in project work.

REQUEST MORE INFO

Sign Up For   Automatic Job Alerts   With Sigma Recruitment! Sign Up Now